EXTENSION CORDS
Use only
OPERATING CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING THE SAW
1.To start the saw, press the “START” button (A) Fig. 15.
2.To stop the saw, press the “STOP” button (B) Fig. 15.
LOCKING SWITCH
IN THE “OFF” POSITION
IMPORTANT: When the band saw is not in use, the switch should be locked in the “OFF” position using a padlock (C) Fig. 16, (with 3/16 diameter shackle) through the two holes (D) in the switch plate, as shown in Fig. 16. NOTE: Padlock shown is available as accessory Model
A
B
D
Fig. 15 | Fig. 16 |
8
