![](/images/new-backgrounds/1283635/28363515x1.webp)
ATTACHING DUST CHUTE
Attach the dust chute (A) Fig. 11 to the bottom of the top shelf (B) using the four 5/8"
MOVING SANDING ARM TO THE VERTICAL POSITION
The sanding arm is shipped in the horizontal position (Fig.
12). To move the arm to the vertical position:
1.Loosen the lock handle (A) Fig. 12. NOTE: Lock handle is
2.Move the sanding arm (B) to the vertical position (Fig. 13) and tighten the lock handle (A).
A
Fig. 12
A
B
Fig. 11
B
A
Fig. 13
OPERATING CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING THE TOOL
The
LOCKING SWITCH IN THE “OFF” POSITION
IMPORTANT: When the tool is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use, using a padlock (A) Fig. 15 with a 3/16" diameter shackle.
A
A
Fig. 14 | Fig. 15 |
8