Delta 31-552 instruction manual

6" Abrasive Belt

PART NO. 406-03-651-0017 (0110)

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

6" Abrasive Belt Finishing Machine

shown with optional enclosed steel

stand and electricals.

Contents

Main INSTRUCTION MANUAL 6" Abrasive Belt Finishing Machine (Model 31-552) GENERAL SAFETY RULES ADDITIONAL SAFETY RULES FOR ABRASIVE BELT FINISHING MACHINES SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. POWER CONNECTIONS GROUNDING INSTRUCTIONS THREE PHASE INSTALLATION SINGLE PHASE INSTALLATION 230 VOLT OPERATING INSTRUCTIONS FOREWORD UNPACKING AND CLEANING MINIMUM GAUGE EXTENSION CORD ASSEMBLY STAND AND ELECTRICALS ASSEMBLING MACHINE TO STAND ALIGNING PULLEYS, ASSEMBLING BELT AND ADJUSTING BELT TENSION ASSEMBLING BELT GUARD OPERATING CONTROLS AND ADJUSTMENTS STARTING AND STOPPING THE ABRASIVE FINISHING MACHINE LOCKING SWITCH IN THE OFF POSITION ADJUSTING SANDING BELT TENSION AND TRACKING ADJUSTING TABLE ADJUSTING POSITION OF SANDING ARM INSTALLING OR REMOVING ABRASIVE BELT ADJUSTING THE PLATEN ABRASIVE BELTS - THEIR SELECTION AND USE ACCESSORIES PARTS, SERVICE OR WARRANTY ASSISTANCE Two Year Limited Warranty The following are trademarks of PORTER-CABLE PORTER-CABLE DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE DELTA) Delta ms cercano. Delta deben obtenerse ponindose en contacto con cualquier distribuidor Porter-Cable Delta products should be obtained by contacting any Porter-Cable Delta Distributor, Authorized Service Center, or Porter-Cable