26.WHEN THE TOOL IS NOT IN USE the switch should be locked in the "OFF" position to prevent unauthorized use.

27.WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chem- icals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

· lead from lead-based paints,

· crystalline silica from bricks and cement and other

masonry products, and

· arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out micro- scopic particles.

SAVE THESE INSTRUCTIONS

ADDITIONAL SAFETY RULES FOR

CIRCULAR SAWS

1.DO NOT operate your saw until it is completely assembled and installed according to the instructions.

2.IF YOU ARE NOT thoroughly familiar with the op- eration of circular saws, obtain advice from your super- visor, instructor, or other qualified person.

3.ALWAYS use blade guard, splitter and anti-kick- back fingers for every operation for which it can be used, including all thru sawing.

4.ALWAYS hold the work firmly against the miter gage or fence.

5.NEVER use the fence as a cut-off gage when cross-cutting.

6.MOVE the rip fence out of the way when cross-cut-

ting.

7.NEVER perform any operation “free-hand” which means using your hands to support or guide the work- piece. Always use either the fence or miter gage to posi- tion and guide the work.

8.ALWAYS use a push stick for ripping narrow stock. Refer to ripping applications in instruction manual where the push stick is covered in detail.

9.AVOID KICKBACKS (work thrown back toward you) by:

A.Keeping blade sharp.

B.Keeping rip fence parallel to the saw blade.

C.Keeping splitter and anti-kickback fingers and guard in place and operating.

D.Not releasing the work before it is pushed all the way past the saw blade.

E.Not ripping work that is twisted or warped or does not have a straight edge to guide along the fence.

10.AVOID awkward operations and hand positions where a sudden slip could cause your hand to move into the cutting tool.

11.ALWAYS keep hands and fingers away from the blade.

12.NEVER stand or have any part of your body in line with the path of the saw blade.

13.NEVER reach behind or over the cutting tool with either hand for any reason.

14.DIRECTION OF FEED. Feed work into blade or cutter against the direction or rotation of the blade or cutter only.

15.DO NOT feed the material too fast while cutting. Feed the material only fast enough so that the blade will cut.

16.NEVER attempt to free a stalled saw blade without first turning the saw “OFF.”

17.NEVER start the saw with the workpiece pressed against the blade.

18.NEVER turn the saw “ON” before clearing the table of all objects (tools, scraps of wood, etc.).

19.ALWAYS STOP the saw before removing scrap pieces from the table.

20.NEVER perform layout, assembly or set-up work on the table while the saw is operating.

21.PROVIDE adequate support to the rear and sides of the saw table for wide or long workpieces.

22.NEVER use solvents to clean plastic parts. Solvents could possibly dissolve or otherwise damage the material. Only a soft damp cloth should be used to clean plastic parts.

23.SHOULD any part of your circular saw be missing, damaged, or fail in any way, or any electrical compo- nents fail to perform properly, shut off switch and remove plug from power supply outlet. Replace missing, dam- aged or failed parts before resuming operation.

24.USE only 10" diameter saw blades rated for 4600 RPM or higher with 5/8" arbor holes.

25.THE USE of attachments and accessories not rec- ommended by Delta may result in the risk of injuries.

26.ADDITIONAL INFORMATION regarding the safe and proper operation of this product is available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201, in the Accident Prevention Manual for In- dustrial Operations and also in the Safety Data Sheets provided by the NSC. Please also refer to the American National Standards Institute ANSI 01.1 Safety Require- ments for Woodworking Machinery and the U.S. Depart- ment of Labor OSHA 1910.213 Regulations.

27.SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others.

3

Page 2 Page 4
Page 3
Image 3
Delta 36-540, 36-545 instruction manual Additional Safety Rules for Circular Saws
Page 2 Page 4

36-545, 36-540 specifications

The Delta 36-540 and 36-545 are highly regarded table saws designed for precision, durability, and efficiency. These models are widely used by woodworkers, both hobbyists and professionals, and they offer advanced features that enhance cutting capabilities and overall user experience.

One of the main features of the Delta 36-540 is its powerful 15-amp motor, which delivers ample torque and ensures that even the toughest hardwoods can be cut with ease. The motor is designed for smooth operation and minimal vibration, thereby enhancing accuracy during cutting tasks. The saw has a 10-inch blade that can reach impressive speeds, allowing for quick and clean cuts.

The Delta 36-545 model offers similar performance, but it comes with additional features that cater to more advanced users. Both models include a high-quality cast iron table, which provides a robust and stable surface for cutting. This construction helps reduce vibrations and increases the overall stability of the saw, ensuring precise cuts every time.

Both saws incorporate a patented blade-guard system, promoting safety in the workshop. This feature provides clear visibility of the cutting area while safeguarding the user from accidental blade contact. Additionally, the easy-to-use adjustment mechanisms allow users to modify blade height and angle quickly, simplifying the setup process for different cutting applications.

Another significant aspect of the Delta 36-540 and 36-545 is their fence systems. They come equipped with a reliable and adjustable fence that locks firmly in place, ensuring consistent and straight cuts. The alignment and precision of the fence save time during setup and provide users with confidence in their cuts.

Portability is also a key element in both models, with foldable stands that allow for easy transport and storage. Users can take their saws to job sites or store them away conveniently when not in use.

In summary, the Delta 36-540 and 36-545 table saws combine power, precision, and safety features designed to enhance the woodworking experience. With their robust construction, user-friendly adjustments, and advanced safety measures, these saws are an excellent choice for any woodworker looking for a reliable and efficient tool. Whether for professional use or personal projects, both models deliver exceptional performance, making them a staple in the woodworking community.
Top Page Image Contents