Connecting SAW to Power Source, Power Connections

CONNECTING SAW TO POWER SOURCE

POWER CONNECTIONS

A separate electrical circuit should be used for your tools. This circuit should not be less than #12 wire and should be protected with a 20 amp fuse. Have a certified electrician replace or repair a worn cord immediately. Before connecting the motor to a power line, make sure the switch is in the “OFF” posi- tion and be sure that the electric current is of the same characteristics as stamped on the motor name- plate. Running on low voltage will damage the motor.

WARNING: DO NOT EXPOSE THE TOOL TO RAIN OR OPERATE THE TOOL IN DAMP LOCA- TIONS.

MOTOR SPECIFICATIONS

Your saw is wired for 110-120 volt, 60 HZ alternating current. Before connecting the saw to the power source, make sure the switch is in the “OFF” position.

GROUNDING INSTRUCTIONS

CAUTION: THIS TOOL MUST BE GROUNDED WHILE IN USE

TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the out- let, have the proper outlet installed by a qualified electri- cian.

Improper connection of the equipment-grounding con- ductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely under- stood, or if in doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and 3-hole receptacles that accept the tool's plug, as shown in Fig. 21

Repair or replace damaged or worn cord immediately.

This tool is intended for use on a circuit that has an out- let and a plug that looks like the one shown in Fig. 21. A temporary adapter, which looks like the adapter illus- trated in Fig. 22 may be used to connect this plug to a 2-pole receptacle, as shown in Fig. 22, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. THIS ADAPTER IS NOT APPLICABLE IN CANADA. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground, such as a properly grounded outlet box, as shown in Fig. 22.

CAUTION: IN ALL CASES, MAKE CERTAIN THE RE- CEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE HAVE A CERTIFIED ELEC- TRICIAN CHECK THE RECEPTACLE.

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDED OUTLET BOX

GROUNDING MEANS

ADAPTER

GROUNDING BLADE IS

LONGEST OF THE 3 BLADES

Fig. 21

Fig. 22

36-545, 36-540 specifications

The Delta 36-540 and 36-545 are highly regarded table saws designed for precision, durability, and efficiency. These models are widely used by woodworkers, both hobbyists and professionals, and they offer advanced features that enhance cutting capabilities and overall user experience.

One of the main features of the Delta 36-540 is its powerful 15-amp motor, which delivers ample torque and ensures that even the toughest hardwoods can be cut with ease. The motor is designed for smooth operation and minimal vibration, thereby enhancing accuracy during cutting tasks. The saw has a 10-inch blade that can reach impressive speeds, allowing for quick and clean cuts.

The Delta 36-545 model offers similar performance, but it comes with additional features that cater to more advanced users. Both models include a high-quality cast iron table, which provides a robust and stable surface for cutting. This construction helps reduce vibrations and increases the overall stability of the saw, ensuring precise cuts every time.

Both saws incorporate a patented blade-guard system, promoting safety in the workshop. This feature provides clear visibility of the cutting area while safeguarding the user from accidental blade contact. Additionally, the easy-to-use adjustment mechanisms allow users to modify blade height and angle quickly, simplifying the setup process for different cutting applications.

Another significant aspect of the Delta 36-540 and 36-545 is their fence systems. They come equipped with a reliable and adjustable fence that locks firmly in place, ensuring consistent and straight cuts. The alignment and precision of the fence save time during setup and provide users with confidence in their cuts.

Portability is also a key element in both models, with foldable stands that allow for easy transport and storage. Users can take their saws to job sites or store them away conveniently when not in use.

In summary, the Delta 36-540 and 36-545 table saws combine power, precision, and safety features designed to enhance the woodworking experience. With their robust construction, user-friendly adjustments, and advanced safety measures, these saws are an excellent choice for any woodworker looking for a reliable and efficient tool. Whether for professional use or personal projects, both models deliver exceptional performance, making them a staple in the woodworking community.

Delta 36-545, 36-540 Connecting SAW to Power Source, Power Connections, Motor Specifications

Models: 36-545 36-540