Sharp XL-UH220H Specifications, Amplifier, Speaker, References, General, CD player, Tuner, Power

XL-UH220H

Specifications

References

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source	AC 230 ~ 240V, 50 Hz
Power	Power on: 100 W
consumption	Power stand-by: 0.6 W(*)
Dimensions	Width: 175 mm (6-3/4")
	Height: 240 mm (9-1/2")
	Depth: 315 mm (12-1/5")
Weight	5.3 kg (11.7 lbs.)

( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to page 10 to cancel the demonstration mode.

Amplifier

Output power	MPO: 182 W (91 W + 91 W) (10% T.H.D.)
	RMS: 100 W (50 W + 50 W) (10% T.H.D.)
	RMS: 76 W (38 W + 38 W) (0.9% T.H.D.)
Output terminals	Speakers: 6 ohms
	Headphones: 16 - 50 ohms
	(recommended: 32 ohms)
	Subwoofer pre-out (audio signal):
	200 mV/10 k ohms at 70 Hz
Input terminals	Video/Auxiliary (audio signal):
	500 mV/47 k ohms

USB

Class	Mass storage class
Support File	MP3/WMA (do not support DRM file)
Format support	FAT 16 or FAT 32
Bitrate support	MP3 (32 ~ 320 kbps)
	WMA (64 ~ 160 kbps)
Other	MP3 lD3 - tag only supports version 1.x
	USB supports version 2.0

CD player

Type	5-disc multi-play compact disc player
Signal readout	Non-contact, 3-beam semiconductor laser
	pickup
D/A converter	1-bit D/A converter
Frequency	20 - 20,000 Hz
response
Dynamic range	90 dB (1 kHz)

Tuner

Frequency range	FM: 87.5 - 108 MHz
	AM: 522 - 1,620 kHz

Speaker

Type	2-way type speaker system
	5 cm (2") tweeter
	13 cm (5-1/8") woofer
Maximum input	100 W
power
Rated input power	50 W
Impedance	6 ohms
Dimensions	Width: 185 mm ( 7-1/4")
	Height: 260 mm (10-1/4")
	Depth: 205 mm (8-1/16")
Weight	2.4 kg (5.3 lbs.)/each

40