Sharp XL-UH220H Preparation for, Aerial connection, Speaker connection, Supplied FM aerial

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM and Earth (GND) terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

XL-UH220H

Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

SPEAKERS

RIGHT LEFT

AC INPUT

Red Black

Caution:

Use speakers with an impedance of 6 ohms or impedance speakers can damage the unit.

more, as lower

Use

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

AC INPUT

RIGHT LEFT

ANTENNA

FM GND AM

ANTENNA

VIDEO/AUX IN

RIGHT LEFT

75 OHMS SUBWOOFER OUT-PRE

Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

Do not let the bare speaker wires touch each other.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

Do not stand or sit on the speakers. You may be injured.

Speaker grilles are removable

SPEAKERS
	IMPEDANCE:
RATED SPEAKER .
	S MIN
6 OHM
RIGHT	LEFT

Incorrect

Preparation for

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

Installing the AM loop aerial:
< Assembling >	< Attaching to the wall >

Make sure nothing comes into contact with the speaker diaphragm when you remove the speaker grilles.

Wall Screws (not supplied)

9