Sharp XL-UH220H Enhancing your system, Listening to the playback sounds from VCR, DVD, etc

XL-UH220HEnhancing your system

The connection lead is not included. Purchase a commercially avail- able lead as shown below.

VIDEO/AUX IN

RIGHT LEFT

ANTENNA

FM GND AM

75 OHMS

VIDEO/AUX IN

RIGHT LEFT

Listening to the playback sounds from VCR, DVD, etc.

1Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/AUX IN sockets.

When using video equipment, connect the audio output to this unit and the video output to a television.

2Press the ON/STAND-BY button to turn the power on.

3Press the VIDEO/AUX/USB (USB/AUX) button.

4Play the connected equipment.

Advanced Features

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

AC INPUT

RIGHT LEFT

PRE-OUT

SUBWOOFER

Note:

To prevent noise interference, place the unit away from the television.

Headphones

Before plugging in or unplugging the headphones, reduce the volume.

Be sure your headphones have a 3.5 mm (1/8") diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.

Auto power on function (USB/AUX):

When you press any of the following buttons, the unit turns on. VIDEO/AUX/USB button (main unit and remote control): The unit turns on and the "USB" function is activated.

/ button on the main unit: The unit turns on and playback of the last function starts (CD,TUNER,VIDEO/AUX/USB).

36