Sharp XL-UH220H disc, Press the ON/STAND-BY button to turn the power on, Press the CD button

1Press the ON/STAND-BY button to turn the power on.

2Press the CD button.

3Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1.

4Place the disc on the disc tray 1, label side up.

Be sure to place 8 cm (3") disc in the middle of the disc trays.

12 cm (5") 8 cm (3")

5Press the OPEN/CLOSE button to close the disc tray 1.

				MP3 indicator
[CD]	TOTAL indicator		[MP3/WMA]		WMA indicator
Total number of		Total playing	Total number
tracks on the disc		time of the disc	of files

Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds).

6You can place discs on the trays 2 - 5 by following steps 3 - 5.

7Press the / button to start playback.

Disc play indicator

XL-UH220H

Playback will begin from track 1 on DISC 1. After that disc finishes playing, the next disc will automatically play.

After the last track on the fifth disc is played, the unit will stop automatically.

When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc.

To exchange other discs whilst playing a disc:
Press one of the				1 -			5 buttons for the stopped disc and within 5			Playback
seconds, press the						OPEN/CLOSE button and exchange discs.
To remove the discs:
In the stop mode, press the								1 -	5 button and within 5 seconds,
press the			OPEN/CLOSE button.							disc
To skip to a desired disc:
Press one of the					1 -		5 buttons and within 5 seconds, press the
	(CD	) button.								MP3/WMA
Caution:
	Do not place two discs in a same tray.
	Do not play discs of special shapes (heart, octagon, etc).
	It may cause malfunctions.
	Do not push the disc tray whilst it is moving.
	If the power fails whilst the tray is open, wait until the power is
	restored.									or
	If the disc tray is stopped with force, "ER-CD20" will appear on the
	display for 3 seconds and the unit will not function. If this occurs,									CD
	press the ON/STAND-BY button to enter the power stand-by
	mode and then turn the power on again.
	If TV or radio interference occurs during CD operation, move the
	unit away from the TV or radio.
	If a disc is damaged, dirty, or loaded upside down, the disc will be
	skipped.

15