8.Place the intake funnel assembly (A) on the lower support tube (B) Fig. 14. Secure it with a tube clamp
(C).
A |
B |
C |
Fig. 14 |
ATTACHING THE VACUUM HOSE TO THE DUST COLLECTOR
Disconnect the machine from the power source!
1.Place the intake cap holder (D) on the dust collector (Fig. 15).
NOTE: Do not cover the intake port with the intake cap when attaching the hose to the intake port.
2. Place a hose clamp (A) Fig. 15 on the end of the |
|
vacuum hose (B). Slide the hose around the intake |
|
port (see the inset). Tighten the hose clamp (A). | B |
|
Fig. 15 |
D |
C |
A |
3.Place the remaining hose clamp (A) Fig. 16 around the other end of the hose (B). Slide the hose (B) on the intake funnel (C). Tighten the hose clamp (A).
NOTE: If desired, the intake funnel (C) can be rotated to the vertical position (Fig. 17).
C |
A |
B |
Fig. 16 |
Fig. 17 |
10
