MACHINE USE

This versatile dust collector is light, compact. It can easily be transported for use in and out of the workshop. The dust collector can be used with many different types of woodworking machinery.

Fig. 22 illustrates the dust collector used with a router. Note that the intake port has been adjusted to collect dust created by the router.

Fig. 23 illustrates the dust collector used with a table saw. Note that the intake port is removed from the lower tube support. The intake funnel can be clamped to a tool.

Fig. 24 illustrates the dust collector used with a drum sander that is equipped with a dust removal port. You can connect the 4" hose directly to the dust removal port.

Fig. 23

Fig. 22

Fig. 24

TRANSPORTATION AND STORAGE

1.The dust collector features a convenient carrying handle with rubber grip (A) Fig. 25, which allows the unit to be carried easily from one job area to another.

IMPORTANT: The dust collector weighs approximately 46 lbs. Take care when you lift or transport this unit.

2.In addition to the carrying handle, the machine features a storage mounting bracket (B) Fig. 26 with a hole for mounting the dust collector to a wall or wooden support when not in use.

A

Fig. 25

A

Fig. 26

TROUBLESHOOTING

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

12

Page 12
Image 12
Delta A15098 instruction manual Troubleshooting, Transportation and Storage