READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,
eyes, or with any pets or animals. Serious injury can occur.
Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!
Never pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.
Always keep unit in a vertical position
.
DO NOT use hot water, use cold water only.
Never turn water supply off while pressure washer motor is running or damage to pump will result.
This unit is equipped with an automatic stop mode. When the trigger is released the motor is shut off automatically. When the trigger is pressed again the motor will automatically start. The time between release and engagement must not be less than
Stand on a stable surface and grip gun/wand firmly with both hands. Expect the gun to kick when triggered.
This product is intended for intermittent use only. Operate pressure washer one hour or less in a 2 hour period.
If you do not understand these precautions please call
BEFORE STARTING
1.Move pressure washer to level ground.
3.Connect wand to gun. Tighten securely. See figure 5.
Figure 5
2.Make sure the ON/OFF switch is in the OFF position
D27665 | 8- ENG |
