17.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in “OFF” position before plugging in power cord. In the event of a power failure, move switch to the “OFF” position.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to ensure that it will operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

22.STAY ALERT, WATCH WHAT YOU ARE DOING, AND USE COMMON SENSE WHEN OPERATING A POWER TOOL. DO NOT USE TOOL WHILE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION. A moment of inattention while operating power tools may result in serious personal injury.

23.MAKE SURE TOOL IS DISCONNECTED FROM P O W E R S U P P LY w h i l e m o t o r i s b e i n g m o u n t e d , connected or reconnected.

24.THE DUST GENERATED by certain woods and wood products can be injurious to your health. Always operate machinery in well ventilated areas and provide for proper dust removal. Use wood dust collection systems whenever possible.

ADDITIONAL SAFETY RULES FOR DRILL PRESSES

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1.DO NOT OPERATE THIS TOOL UNTIL it is assembled and installed according to the instructions.

2.OBTAIN ADVICE from your supervisor, instructor, or another qualified person if you are not familiar with the operation of this tool.

3.FOLLOW ALL WIRING CODES and recommended electrical connections.

4.NEVER START THE MACHINE BEFORE CLEARING THE TABLE of all objects (tools, scrap pieces, etc.).

5.NEVER START THE MACHINE with the drill bit, cutting tool, or sander against the workpiece.

6.TIGHTEN ALL LOCK HANDLES before starting the machine.

7.USE ONLY DRILL BITS, CUTTING TOOLS, SANDING DRUMS, OR OTHER ACCESSORIES that have shanks of 1/2" in diameter or less.

8.USE ONLY DRILL BITS, CUTTING TOOLS, OR SANDING DRUMS that are not damaged.

9. PROPERLY LOCK DRILL BIT, CUTTING TOOL, OR SANDING DRUM IN THE CHUCK before operating this machine.

10.USE RECOMMENDED SPEEDS for all operations.

11.AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause a hand to move into the cutting tool.

12.KEEP ARMS, HANDS, AND FINGERS away from the cutting tool.

13.HOLD THE WORKPIECE FIRMLY AGAINST THE TABLE. Do not attempt to drill a workpiece that does not have a flat surface against the table. Prevent the workpiece from rotating by clamping it to the table or by securing it against the drill press column.

14.TURN THE MACHINE “OFF” AND WAIT FOR THE DRILL BIT, CUTTING TOOL, OR SANDER TO STOP TURNING prior to cleaning the work area, removing debris, removing or securing workpiece, or changing the angle of the table. A moving drill bit, cutting tool, or sander can be dangerous.

15 PROPERLY SUPPORT LONG OR WIDE workpieces.

16.NEVER PERFORM LAYOUT, ASSEMBLY, or set- up work on the table/work area when the machine is running.

17TURN THE TOOL “OFF”, disconnect the tool from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs.

18.DISCONNECT THE TOOL from the power source, and clean the table/work area before leaving the tool. LOCK THE SWITCH IN THE “OFF” POSITION to prevent unauthorized use.

19.ADDITIONAL INFORMATION regarding the safe and proper operation of this tool is available from the Power Tool Institute, 1300 Summer Avenue, Cleveland, OH 44115-2851. Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machines and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others.

3

Page 2 Page 4
Page 3
Image 3
Delta DP350 instruction manual Refer to them often Use them to instruct others, Additional Safety Rules for Drill Presses
Page 2 Page 4

DP350 specifications

The Delta DP350 is a powerful and versatile device known for its robust features and advanced technologies, making it an ideal choice for various applications in both commercial and industrial settings. With its sleek design and user-friendly interface, the DP350 stands out as a reliable solution for professionals seeking efficiency and performance.

One of the main features of the Delta DP350 is its impressive power output capabilities. Designed for demanding applications, it offers a robust wattage rating that ensures it can handle heavy loads and operate various devices seamlessly. This power output is complemented by its energy efficiency, minimizing operational costs while maximizing productivity.

The device incorporates cutting-edge technologies, including a state-of-the-art digital control system. This system allows for precise monitoring and adjustment of power parameters, ensuring optimal performance under varying load conditions. Additionally, the DP350 features an advanced cooling mechanism, which enables it to operate continuously without overheating, thereby extending its lifespan and reliability in critical environments.

Another noteworthy characteristic of the Delta DP350 is its extensive connectivity options. It supports multiple communication protocols, enabling seamless integration with other systems and devices. This flexibility is essential for modern setups where interoperability is crucial. Furthermore, the DP350 is equipped with smart grid technology, making it compatible with renewable energy systems, which aligns with the growing trend toward sustainability.

Safety is a paramount concern with the Delta DP350, which comes with comprehensive protection features. These include overload protection, short-circuit prevention, and thermal protection, ensuring that the device operates safely under all conditions. Additionally, the user-friendly display provides real-time information on operational status, making it easy for users to monitor performance at a glance.

The Delta DP350 is also designed for durability and resilience in harsh environments, with a robust casing that can withstand external factors such as dust and moisture. This makes it suitable for a variety of industrial applications, from manufacturing to telecommunications.

In summary, the Delta DP350 combines power, efficiency, and advanced technology in a user-friendly package. Its impressive features, including digital control, extensive connectivity, and reliable safety measures, make it an excellent choice for professionals looking to enhance their operations. Whether for industrial use or commercial applications, the DP350 delivers the performance and reliability needed to succeed in a competitive landscape.
Top Page Image Contents