Manuals / Delta / Lawn and Garden / Pressure Washer

Delta DT2400CS instruction manual Risk of Fluid Injection, Risk of Chemical Burn

Models: DT2400CS

1 24
Download 24 pages 38.7 Kb
Page 4
Image 4

HAZARD

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

WHAT CAN HAPPEN

•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers.

HOW TO PREVENT IT

•If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against dam- age to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.

HAZARD

RISK OF FLUID

INJECTION

WHAT CAN HAPPEN

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

HOW TO PREVENT IT

•Never place hands in front of nozzle.

•Direct spray away from self and others.

•Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

•Do not allow hose to contact muffler.

•Never attach or remove wand or hose fittings while system is pressurized.

•To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

•Use only hoses and accessories rated for pressure higher than your pressure washer's p.s.i.

HAZARD

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

•Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flam- mable solvent with this product could re- sult in serious injury or death.

HOW TO PREVENT IT

•Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

•Read and understand all warnings and instructions supplied by cleaning solution manufacturer.

•Wear protective clothing to protect eyes and skin from contact with sprayed materials.

D27918

4- ENG

Page 3 Page 5
Page 4
Image 4
Delta DT2400CS instruction manual Risk of Fluid Injection, Risk of Chemical Burn
Page 3 Page 5

DT2400CS specifications

The Delta DT2400CS is a high-performance tool that caters to the needs of both professionals and enthusiasts in woodworking and construction. This compact yet powerful saw is engineered for precision, durability, and ease of use, making it an essential addition to any workshop.

One of the standout features of the Delta DT2400CS is its robust 15-amp motor, which provides substantial cutting power and enables the saw to tackle a variety of materials effortlessly. The motor supports a high no-load speed, ensuring smooth and efficient operation. This allows users to cut through hardwoods, softwoods, and composite materials without encountering bogging down or stalling.

The DT2400CS is equipped with a 24-inch capacity, making it ideal for larger workpieces without sacrificing the portability that many users desire. Its adjustable table height and width provide added flexibility and support for various cutting tasks, allowing operators to achieve superior accuracy in their cuts. The saw features a precision-ground cast iron table for stability and reduced vibration, ensuring cleaner cuts and improving the overall experience.

Safety is a top priority with the Delta DT2400CS, which includes a range of protective features. The blade guard is easily adjustable and removable, ensuring that operators can maintain proper safety practices while having clear visibility of the cutting line. The integrated riving knife helps prevent kickback, and the on/off switch is conveniently located for quick access during operation.

The Delta DT2400CS also incorporates advanced technology for enhanced performance. The built-in dust collection port facilitates a cleaner workspace by connecting to standard shop vacuums, which is essential for maintaining visibility and safety. Additionally, the saw has a sturdy fence system that locks securely in place, allowing for straight, consistent cuts.

Overall, the Delta DT2400CS is characterized by its blend of power, precision, and safety features, making it an optimal choice for carpenters, cabinet makers, and DIY enthusiasts alike. With its professional-grade specifications and user-friendly design, this table saw is designed to handle a wide range of cutting tasks, elevating users' woodworking projects to the next level. Whether working on intricate designs or large construction projects, the Delta DT2400CS proves to be a reliable ally, ensuring both quality results and user satisfaction.