d.Before reconnecting cleaning solution hose to chemical injector barb fitting make sure that any remaining cleaning solution has been completely drained from the cleaning solution hose.

To rinse chemical using cleaning solution system tank

a.

Turn control valve knob arrow to the

 

 

 

 

down (off) position.

 

 

 

b.

Fill one of the cleaning solution

 

 

 

 

system tanks with clean water.

 

 

 

c.

Turn control valve knob toward tank

 

 

 

 

with clean water.

 

 

 

d.

Depress trigger to draw clean water

 

 

 

 

through chemical injection system to

 

 

Control Valve Knob

 

rinse system thoroughly.

 

 

 

 

 

 

 

2. Turn engine off. See Engine Owner’s

 

 

 

Tank to

 

Manual. NOTE: NEVER turn the water off

 

be used

 

with the engine running.

 

 

 

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures. NOTE: Cleaning solution must be removed from cleaning solution tanks if storing unit

longer than 30 days, see Storage section for correct procedure.

MAINTENANCE

When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause

serious injury or death!

Before performing any maintenance or repair, disconnect spark plug wire, let engine cool and release all water pressure. The engine contains flammable fuel. DO NOT smoke or work near open flames while performing maintenance.

To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high-temperatures or dusty conditions, more frequent maintenance checks will be required.

ENGINE

Consult the Engine Owners Manual for the manufacturer's recommendations for any and all maintenance.

NOZZLE CLEANING

If the nozzle becomes clogged with foreign matter, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions:

17- ENG

D27918

Page 16 Page 18
Page 17
Image 17
Delta DT2400CS instruction manual Maintenance, Engine Nozzle Cleaning
Page 16 Page 18

DT2400CS specifications

The Delta DT2400CS is a high-performance tool that caters to the needs of both professionals and enthusiasts in woodworking and construction. This compact yet powerful saw is engineered for precision, durability, and ease of use, making it an essential addition to any workshop.

One of the standout features of the Delta DT2400CS is its robust 15-amp motor, which provides substantial cutting power and enables the saw to tackle a variety of materials effortlessly. The motor supports a high no-load speed, ensuring smooth and efficient operation. This allows users to cut through hardwoods, softwoods, and composite materials without encountering bogging down or stalling.

The DT2400CS is equipped with a 24-inch capacity, making it ideal for larger workpieces without sacrificing the portability that many users desire. Its adjustable table height and width provide added flexibility and support for various cutting tasks, allowing operators to achieve superior accuracy in their cuts. The saw features a precision-ground cast iron table for stability and reduced vibration, ensuring cleaner cuts and improving the overall experience.

Safety is a top priority with the Delta DT2400CS, which includes a range of protective features. The blade guard is easily adjustable and removable, ensuring that operators can maintain proper safety practices while having clear visibility of the cutting line. The integrated riving knife helps prevent kickback, and the on/off switch is conveniently located for quick access during operation.

The Delta DT2400CS also incorporates advanced technology for enhanced performance. The built-in dust collection port facilitates a cleaner workspace by connecting to standard shop vacuums, which is essential for maintaining visibility and safety. Additionally, the saw has a sturdy fence system that locks securely in place, allowing for straight, consistent cuts.

Overall, the Delta DT2400CS is characterized by its blend of power, precision, and safety features, making it an optimal choice for carpenters, cabinet makers, and DIY enthusiasts alike. With its professional-grade specifications and user-friendly design, this table saw is designed to handle a wide range of cutting tasks, elevating users' woodworking projects to the next level. Whether working on intricate designs or large construction projects, the Delta DT2400CS proves to be a reliable ally, ensuring both quality results and user satisfaction.
Top Page Image Contents