GETTING READY
Configuring Power Saving Settings
You can configure the settings described below to conserve battery power.
Sleep | : Automatically turns off the monitor screen |
| if no operation is performed for a specified |
| amount of time in a REC mode. |
| Performing any button operation causes |
| the monitor screen to turn back on. |
Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.
1.Turn on the camera.
2.Press [MENU].
3.Use [] and [] to select the “Set Up” tab.
4.Use [] and [] to select the feature whose
setting you want to configure, and then press [].
●See “Using the
To configure this feature: Select this setting:
SleepSleep
Auto Power Off | Auto Power Off |
5.Use [] and [] to change the currently selected setting, and then press [SET].
•Available Sleep settings are: “30 sec”, “1 min”, “2 min”, and “Off”.
•Available Auto Power Off settings are: “2 min” and “5 min”.
•Note that the Sleep feature does not operate in the PLAY mode.
•Pressing any button while the camera is in the Sleep state immediately turns the monitor screen back on.
52