BASIC IMAGE RECORDING
2. Record the image. | Flash unit | IMPORTANT! |
• If the camera senses |
| • The flash unit of this camera fires a number of times |
that the flash is |
| when you record an image. The initial flashes are |
necessary, the flash |
| |
unit will pop up |
| information that it uses for exposure settings. The |
automatically if you |
| final flash is for recording. Make sure that you keep |
press the shutter |
| the camera still until the shutter releases. |
release half way or all |
| • Using the flash while “Auto” is selected for the ISO |
the way down. |
| Sensitivity setting increases sensitivity, which can |
|
| cause large amounts of digital noise to appear in the |
• Note that the flash unit |
| image. You can reduce digital noise by using a lower |
| ISO Sensitivity setting. Note, however, that this also | |
does not close |
| |
| has the effect of shortening the flash range (the | |
automatically. After you |
| |
| range that is covered by the light from the flash) | |
are finished using it, |
| |
| (page 119). | |
you need to close it by |
| |
|
| |
hand. |
|
|
| 70 |
| B |
|
|
|
|