BASIC IMAGE RECORDING

Flash Unit Status

You can find out the current flash unit status by pressing the shutter button half way and checking the monitor screen and operation lamp.

Operation lamp*

The indicator is also shown on the monitor screen when the flash unit is ready to fire.

* Operation lamp

When the operation

It means this:

lamp is doing this:

 

 

 

Flashing red

Flash unit is charging

 

 

Lit red

Flash unit is ready to fire

 

 

Changing the Flash Intensity Setting

Perform the following steps to change the flash intensity setting.

1.In a REC mode, press [MENU].

2.Use [] and [] to select the “REC” tab.

3.Use [] and [] to select “Flash Intensity”, and then press [].

4.Use [] and [] to select the setting you want, and then press [SET].

To make flash intensity:

Select this setting:

 

 

Stronger+2

+1

Normal0

–1

Weaker–2

IMPORTANT!

•Flash intensity may not change if the subject is too far or too close to the camera.

72