FX 300 MS Training guide
Standard Deviation
Use the [MODE] key to enter the Standard Deviation (SD) mode when you want to perform statistical calculations using standard deviation. [MODE] [2]
•To clear statistical memory, press [SHIFT] [CLR] [1] [=].
•To enter data, use the following key sequence: <value> [DT]
•Input data is used to calculate the following values:
Sum of the squares (∑ x2) | [SHIFT] |
Sum of data (∑ x) | [SHIFT] |
Number of data items (n) | [SHIFT] |
Mean of the data | [SHIFT] |
Population standard deviation σ n | [SHIFT] |
Sample standard deviation σ | [SHIFT] |
Key points to note:
•[DT] [DT] inputs the same data twice
•You can input multiple entries of the same data using [SHIFT] [;]. To input 100 ten times, press [100] [SHIFT] [;] [10] [DT]
•You can scroll through the data you entered using the up and down arrows on the REPLAY button.
•You can edit the displayed data by inputting a new value and then pressing the [=] key to replace it. If you use the [DT] key (and not the [=] key), this will register the value you input as a new data item and will leave the old value as is.
•If you want to perform statistical calculations, always press the [AC] key first to exit the data display.
•To delete a data value that is displayed, press [SHIFT] [CL].
•If you switch to another MODE, you will no longer be able to display or edit your data.
8
References the Casio | Casio |