Delta TP05G, TP08G specifications

Warning ENGLISH

￿ Please read this instruction carefully before use. ￿ Switch off the power before wiring.

￿ The display panel of TP05G and TP08G is waterproof. But please prevent grease, corrosive liquids and sharp objects from contacting the TP05G and TP08G.

￿ The TP05G and TP08G require 24VDC input power. DO NOT connect input AC power supply to any of the RS-485 communication port; otherwise serious damage may occur. Check all the wiring again before switching on the power.

￿ DO NOT touch any terminal when the power is switched on. DO NOT touch any internal circuit in 1 minute after the power is switched off.

￿ Make sure the ground terminal is correctly grounded in order to prevent electromagnetic interference.

￿Please use the fixed support accessory which is packed together with the product provided by Delta. DO NOT tighten the screws out of the normal torque specifications; otherwise serious damage may occur.

￿Introduction

￿Explanation & Peripherals

Thank you for choosing Delta TP Series. TP05G (BS2/BT2) has the features of high resolution 160×80 dots. When the font is Traditional Chinese character and the font size is 8, TP05G (BS2/BT2) is able to display 14×7 Chinese character; TP08G (BS2/BT2) has the features of high resolution 240×128 dots. When the font is Traditional Chinese character and the font size is 8, TP08G (BS2/BT2) is able to display 21×11 Chinese character. Both of them provide multilingual display and two built-in communication ports, one is for RS-232 and the other is for RS-485/RS-422. RS-232 and RS-485 can be used simultaneously. Besides, they also support built-in RTC, communication/alarm indication LED, etc. functions. Besides, the users can purchase program copy card (optional) to copy settings and programs quickly and save download time. Regarding the editing software, there are various objects and images for various users’ requirements. Please ensure to use TP series with Delta power supply module, DVPPS01 and DVPPS02.

￿Product Outline

Power LED Indicator		Escape/Exit Key
Alar m LED Indicat or		Ar row Keys
Display Area		Numeric Keys
Function Keys			Enter Key
	Multiple Function Keys

￿Function Specifications

Model		TP05G (BS2/BT2)	TP08G (BS2/BT2)
Specifications
Font Size		ASCII: 5×8, 8×8, 8×12, 8×16
	1.	Power on indication (Blink for three times)
Alarm LED Indicator (RED)	2.	Communication error alarm
	3.	Special indication by user programming
Program Memory		1024KB flash memory
		Unsynchronized transmission method: RS-232
Serial Communication Port		Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
RS-232(COM1)		Parity: None/Odd/Even, Transmission speed: 9,600bps~115,200bps
		RS-232: 9 PIN D-SUB male
Extension Communication		Unsynchronized transmission method: RS-485 / RS-422
Port		Data length: 7 or 8 bits, Stop bits: 1 or 2 bits
RS-422(COM1)		Parity: None/Odd/Even, Transmission speed: 9,600bps~115,200bps
RS-485(COM2)		RS-422: 9 PIN D-SUB male, RS-485: 6-Pin removal terminal
Battery Cover		DC 3V battery for HMI
Extension Interface	1.	Update firmware version
	2.	The slot for program copy card
6-Pin Removal Terminal		Include DC 24V input and RS-485 communication input

￿Electrical Specifications

Model		TP05G (BS2/BT2)					TP08G (BS2/BT2)
Specifications
Display					Monochromatic STN LCD
Effective Display Area	83mm(W)× 41mm(H); 3.8” (diagonal					78mm(W)× 41mm(H); 3.8” (diagonal
		preferred)					preferred)
		5×8 dots	32 characters ×10 rows				5×8 dots 48 characters × 16 rows
Display Resolution	160×80	8×8 dots	20 characters ×10 rows			240×128	8×8 dots 30 characters × 16 rows
		8×12 dots	20 characters ×6 rows				8×12 dots 30 characters × 10 rows
		8×16 dots	10 characters ×5 rows				8×16 dots 30 characters × 10 rows
LCD Contrast Adjustment	Set by Software, adjust the contrast by the press button in the function table
LCD Backlight Type				LED Backlight: Automatic Turn-off Setting
Function / Numeric Keys	0~9,F1~F5, ESC, ± , CLR, ←, ,SHIFT, ENTER and Arrow Keys (UP, DOWN )
External Input Power					24V (1.8W Max.)
Memory Capacity					1024K Byte
CPU					ST STR710RZT6
RAM of System					64K Byte
Communication Interface				COM1: RS-232/RS-422 COM2: RS-485
Waterproof Class of Front					IP66 / NEMA4 / UL Type4 indoor
Panel
Operating Temperature				0~50°C; 20-90% RH (non-condensing)
for Hardware
Storage Temperature for					-20~60°C
Hardware
Vibration		5Hz f		9Hz = Continuous: 1.75mm / Occasional: 3.5mm
			≦ ＜
		9Hz		f 150Hz = Continuous: 0.5g / Occasional: 1.0g
			≦ ≦
Shock	15g peak, 11ms duration, half-sine, three shocks in each direction per axis,
		on 3 mutually perpendicular axes (total of 18 shocks)
Radiated Emission					CISPR11, Class A
					‧
Electrostatic Discharge					EN61000-4-2
Immunity
Radiated Immunity					EN61000-4-3
Electrical Fast Transient					EN61000-4-4
Weight / Dimensions		0.43kg; 210×122×45mm (Width(W) × Height(H) × Deep(D))
Cooling Method					Natural Air Cooling

￿ Dimension and Installation

￿ Product Outlook and Dimensions (Units: mm, [ ]: inch)

Back Panel Front Panel and Right Side Diagram

122 [4.8031]	108.26 [4.262]
210 [8.2677]	45 [1.7717]

6-Pin Terminals:
Wire Gauge:12-24 AWG / Torque:4.5 lb.-inch
Mounting Dimensions (Panel Cutout)	Vertical View

196.26 [7.7266]	[1.4764]	[0.2953]7.5
	37.5

￿Installation

Please insert TP05G/TP08G to the opening hole of panel and tighten the screws. However, if a firm mounting TP05G/TP08G to the panel is needed, please use the mounting fixed support accessory which is packed together with TP05G/TP08G, then insert the fixed support in the back and tighten the screws. Please refer to the following sections for correct installation. ( If the fixed support is not installed well, Delta will not guarantee the waterproof function. The screw torque should be 4-5(kg-cm). DO NOT exceed this specification when tightening the screws; otherwise TP05G/TP08G may be damaged.)

Do not install and mount TP05G/TP08G in the following environment.

￿A location subjected to Airborne dust, metallic particles, oil and smoke, corrosive or flammable gases and liquids.

￿A location where temperature and humidity will exceed specifications.

￿A location where vibration and shock will exceed specifications.

￿Password Function

If the users forgot the password, the password can be cleared by using the following code: . This universal code will clear the password and all TP05G/TP08G internal programs. The TP05G/TP08G will be reset to the factory settings. Please pay close attention when using it. The password can be the alphabet from A to Z or the number from 0 to 9. But it must use the function keys F0~F5 to input the password characters. Please refer to the following table.

Function Key	Use Method	Function Key	Use Method
Numeric Key	0 ~ 9	F3	Scrolls in a loop as follows
			J→K→L→M→N→O→P→Q→R
	This key is left direction key and it can		Scrolls in a loop as follows
F1	be used to select the position of the	F4
			S→T→U→V→W→X→Y→Z
	value.
F2	Scrolls in a loop as follows	F5	It can be a right direction key in the
	A→B→C→D→E→F→G→H→I		system menu.

￿Hardware Operation

When the users want to startup TP05G/TP08G, a 24VDC power is needed. After applying 24VDC power to TP05G/TP08G, it will enter into the startup display and then enter the user-designed program. Pressing Esc key and holding on for 5 seconds can return to system menu. There are five selections in the system menu and are described below.

SELECTIONS	EXPLANAION
Download	Use the connection cable (DVPACAB530) to connect the TP05G/TP08G serial communication
	port RS-232 to a PC. Then use the TPEditor software to download an application program to
Program
	TP05G/TP08G.
	Use the connection cable (DVPACAB530) to connect the TP05G/TP08G serial communication
Upload Program	port RS-232 to a PC. Then use the TPEditor software to upload an application program from
	TP05G/TP08G.
	Transfer a program between two TP05G/TP08G units.
	1: Transmit Program ; 2: Receive Program
Copy Program	When transmit programs and data between two TP05G/TP08G units. Set one TP05G/TP08G to
	“Receive Program” mode and the other TP05G/TP08G to “Transmit Program” mode. Please use
	twisted pair wires to connect the two units via the RS-485 ports.
	There are 8 items that used to modify TP05G/TP08G system settings:

1.Communication protocol: Setting the address of TP05G/TP08G, and the communication string for either RS-232 or RS-485.

2.Contrast: Adjust the contrast of LCM display screen.

3.Back-light: adjust the automatic turn off time of LCM. Setting range is 00~99 seconds. If set to 00, the LCM Back-light will not turn off.

4.Date and Time: It is used to set the TP05G/TP08G built-in RTC including year, month, day,

TP05G/TP08G	hour, minute, second and week. Also the internal battery capacity display is shown here.
Settings	5. Buzzer: Used to set the buzzer sound, normal mode or quiet mode.

6.Language Setting: Used to set the displayed language. English, Traditional Chinese, Simplified Chinese or user-defined language.

7.Password setting: Used to set, enable, and disable the password function. If the password function is enabled, it will require the user to input a password before entering any system menu. The factory password is 1234.

8.Startup Display: Used to select the TP05G/TP08G startup display. User can select “user defined” to use the file that designed by TPEditor software and download to TP05G/TP08G.

	There are three methods to connect to PLC:
PLC Connection	1. Using TP05G/TP08G serial communication port (COM1) RS-232: set 8-pin DIP switch to
	RS-485 mode and connect the cable (DVPACAB215 or DVPACAB230) to program
	communication I/O RS-232C of PLC.

2.Using extension communication port (COM2): set 8-pin DIP switch to RS-485 mode and connect 5-pin removal terminal of extension communication port to RS-485 of PLC with

PLC Connection twisted pair.

3.Using extension communication port (COM1): set 8-pin DIP switch to RS-422 mode and connect four pins (6, 7, 8, 9) of 9 PIN D-SUB male to RS-422 of PLC with 4-wire cable.

Execute the internal program that download from TPEditor software or transmitted from other

Execution TP05G/TP08G units. When program is in execution, the user can return to system menu by pressing Escape/Exit (Esc) key for 5 seconds.

￿Communication Connection

TP05/08G may connect to a PC by using connection able DVPACAB515

PC or TP05/08G				PC COM Po rt		TP05/0 8G COM Port
	TO PC (RS-232)	TO TP05/08G		9 PIN D-SUB female		9 PIN D-SUB fe ma le
9	5	1	6	Rx	2	3	T x
6	1	5	9	Tx	3	2	Rx
	9 PIN D-SUB	9 PIN D- SU B		GND	5	5	GND

TP05/08G may connect to a DVP-PLC by using connection cable DVPACAB215/ DVPACAB230 / DVPACAB2A30

1. DVPACAB215				DVPACAB230			PC/TP COM Port		PLC CO M1 Port
							25 PIN D-SUB female		8 PIN MINI DIN
TO PC or TP05/08G			／				Tx	2	4	Rx	2		1
							Rx	3	5	Tx
											5	4	3
	13				TO PLC		GND	7	8	G ND
		25 PIN D-SUB									8		6
								4	1,2	5V
												7
					MINI DIN TERMINAL			5
14	1							6
	5							8
9							20
		9 PIN D-SUB							PLC CO M1 Port
6	1						PC/TP COM Port
							9 PIN D-SUB female		8 PIN MINI DIN
2. DVPACAB2A30							Tx	3	4	Rx	2		1
							Rx	2	5	Tx	5	4	3
TO PC or TP05/08G							GND	5	8	G ND	8		6
					TO PLC			7	1,2	5V		7
9	5							8
6	1				MINI DIN TERMINAL			1
	9 PIN D-SUB							4
								6
TP05G/08G		The Pin definition of 9 PIN D-SUB
1. RS-232						3. DVPACAB630 (RS-422)
	TP05/08G COM Port					TO TP05/08G							TO PLC
	RS-232 9 PIN D-SUB male						5
						9
		3	Tx			6	1				MINI DIN TERMINAL
		2	Rx				9 PIN D-SUB
		5	GND
2. RS-422						TP05/08G COM Port			MITSUBISHI FX-PLC
						9 PIN D-SUB female			COM1 Port RS-422
									8 PIN MINI DIN

TP05/08G COM Port		Rx+	6	7	Tx+	2	1
RS-422 9 PIN D-SUB male
		Rx -	7	4	Tx -	5 4	3
6	Rx +	Tx+	8	2	Rx+	8	6
		Tx -	9	1	Rx -	7
7	Rx -	GND	5	3	SG

8Tx +

9 Tx -

Switch between RS-422 / RS-485 (by using 8-PIN DIP switch)

8-PIN DIP switch	RS-485	RS-422
SW1 ~ SW4	On	Off
SW5 ~ SW8	Off	On

注意事項

￿

￿

請在使用之前，詳細閱讀本使用說明書。

￿

實施配線，務必關閉電源。

￿

意本。機顯示操作面板防水，但對油污或具腐蝕性之液體不具防護作用，避免以尖銳之物品刮傷面板使用時請注24VRS-485

￿

再次確認

配線。

通訊口信號端，否則可能造成嚴重的損壞，因此請在上電之前

￿

輸入電源切斷後，一分鐘之內，請勿觸摸內部電路。請勿在上電時觸摸任何端子。

￿

體上之接地端子

務必正確的 地，可提高產品抗雜訊能力。

￿利用原廠包裝附件之固定架，鎖緊面板固定螺絲時，

太緊以免造成機殼損壞

￿

產品簡介

說明及週邊裝置

TP05G (BS2/BT2)

160×80

8

14×7

TP08G (BS2/BT2)

240×128

時，8

21×11

RS-232 RS-485

RS-422

RS-232

RS-485

LED

購外接程式複DVPPS01製單元，快速DVPPS02移植程式，節省程式下載時間。軟體規劃部份更提供多種物件圖等形功可能供。使使用用者者選可用另。

￿

輸入

電源

為直流

，不可連 於

接

電警功顯源示能示指鍵區示燈

退命出令數輸/操取值入作消鍵鍵

￿

為解析度

，當字體為新細明體字體大小

謝謝您採用台達文本顯示器系列產品。

￿

可顯示

個中文字的文本顯示器；

為解析度

，當字體為新細明體字體大小

時，可顯示

個中文字的文本顯示器。兩者皆支援多國文字顯示，以及內建兩個通訊口（

及

／

，其中

與

可同時使用）。並內建萬年曆、通訊／警告指示

請搭配台達

，

TP05G (BS2/BT2)

TP08G (BS2/BT2)

（電源模組）一起使用。

STN-LCD /

/

產品外觀及各部介紹

BS2

BT2

背光自動關閉設定範圍

1 ~ 99

0

5

25

160 80

240 128

W H

= 83 41

mm

W

H

= 78 41

mm

（

3.8

（

3.8

功能規格5 8

10

複合功能

ASCII

850

BIG 5

GB2324-80

32

10

48

16

8

8

20

10

30

16

功能規格

20

6

30

10

顯示的

8 12

螢

幕

8 16

色

彩

20

5

：白色，

單色

30

8

外

殼

顏

色

：黑色

背

光

ASCII

分鐘（設定值 為不關閉）

析

×

5 8 8 8 8 12 8 16

點

解

度

點在常溫

℃下壽命約 萬小時） ×

顯

示

範

圍

）×（ ）

×

1024KB

）×（ ）

×

（單位：

）；

（單位：

）；

吋（對角線）

RS-232

吋（對角線）

對

比

調

整

段明暗調整

7

8

1

2

R S - 2 3 2

C O M 1

None

Odd非同Even步傳送方式：

9,600bps ~ 115,200bps

語

言

字

：（頁碼

）文字（包含歐洲字型）

RS-232

9 PIN D-SUB male

台灣：（

碼）繁體字型

中國：（

RS碼）簡體字型-485 RS-422

7

8

1

2

R S - 4 2 2

C O M 1

None

Odd

Even

9,600bps ~ 115,200bps

×

×

R S - 4 8 5

C O M 2

非同RS步-傳送422

方9式PIN： D-SUB male

文字數

畫素字型

RS-485

6Pin

×

個字×

列

個字×

列

型

大

小

3V

6 P i n

24V

RS-485

字

： × ， × ， ×

， ×

￿

電源啟動指示（亮／滅三次）／通訊不通警示／使用者程式指定

警 示 指 示 燈 （ 紅 燈

憶

程

式

記

快閃記憶體

串

列

TP05G (BS2/BT2)

／

TP08G (BS2/BT2)

STN LCD

（

W

H

= 83 41

mm

W

H

= 78 41

mm

3.8

3.8

（

充

通

訊

埠

個位元

5 8

32 10

5 8

48 16

資料長度： 或

個位元，停止位元： 或

）

8

8

／

20 10

，傳送速度：

8

8

30

16

（

160 80

極性：

／

8 12

20 6

：

240 128

8

12

30

10

8 16

英文字

10 5

：

8 16

英文字

30 8

電L C D

池

蓋

脫落式端子

介

可由此更換人機直流

電池

擴L

C

D充

面

更新LED韌體版本、程式複製卡插槽

脫 落 式 端 子

0 ~

F1 ~ F

ES

包含直CL流電源

輸SHIF入及

ENTER通訊輸入

U

DOWN

電氣規格

24V

1.8W Max.

1024K Byte

C P U

ST STR710RZT6

R

A

M

64K Byte

顯

示

示

面

器

）×（ ）

×

（單位：

單色

）×（ ）

×

（單位：

）；

解

積

×

）；

×

吋

示

析

度

×

×

吋

×

字

×

×

×

字

字

Model

Specifications

Screen Type / Display

Color

Case Color

Backlight

Resolution

Display Range

Contrast Adjustment

Language/Font

TP05G (BS2/BT2)TP08G (BS2/BT2)

STN-LCD / Monochromatic

BS2: White color, BT2: Black color

The back-light automatic turn off time is 1~99 minutes (0 = do not turn off)

(The back-light life is about 50 thousand hours at 25°C)

160×80 dots	240×128 dots
83mm(W)× 41mm(H);	78mm(W)× 41mm(H);
3.8” (diagonal preferred)	3.8” (diagonal preferred)

10 levels of adjustment

ASCII: (Code page 850) Alphanumeric (including European characters)

Taiwan: (Big 5 codes) Traditional Chinese Fonts

China: (GB2324-80 codes) Simplified Chinese Fonts

The flat surface should be a UL Type 4		Indoor Use Only enclosure or equivalent (IP66/NEMA4). Please
refer to the figures below.	“	”
Installation Method of Insert Module

￿Battery Life and Precision of Calendar Timer

Battery Life

Temperature (°C)	-20	0	20	60
Life (Year)	1.972	2.466	2.712	2.835

Precision of Calendar Timer

1. At 0°C/32°F, less than -117 seconds error per month.

對 比 調 整

COM1

RS-232 RS-422

COM2

RS-485

IP66

NEMA4 UL Type4 indoor

0 ~ 50

20 - 90

RH

-20 ~ 60

5Hz

f

9Hz

1.75mm

3.5mm

9Hz

f

150Hz

0.5g

1.0g

15g peak

11ms

X, Y, Z

3

18

R

F

軟體設定，CISPR11使用功能Class表內A按鍵調整

背 燈 型 式

9，

5，

C，±，

背EN61000燈：自動-4關-2閉設定

及方向鍵（ P，

）

功 能R F鍵 ／ 數 字 鍵

R，←，EN61000‧，

-4T-3，

外

接

體

電

源

（

）

記

憶

容

量

中央處理單元（

）

系

統

介

面

：

／

：

通

訊

／

／

前

面 板 防

水 等 級

℃﹪

（不可凝結）

硬

體

儲使

藏用 溫

度

℃；相對濕度

Display Text

5 × 8 dots

8 × 8 dots

32 characters × 10 rows	48 characters × 16 rows
20 characters × 10 rows	30 characters × 16 rows

2. At 25°C/77°F, less than 52 seconds error per month.

耐	衝震	擊動			EN61000-4-4				次
			0.43kg	210 122 45mm		W	H	D
				，≦ ≦＜	，半弦波連，續：		／軸非正／連負非續各連：續次：，共

8 × 12 dots

8 × 16 dots

20 characters × 6 rows	30 characters × 10 rows
20 characters × 5 rows	30 characters × 8 rows

3. At 55°C/131°F, less than -132 seconds error per month.

冷重高靜 量頻電 卻／輻暫放輻外射態電方型度測尺測 式寸試 ； × × 空氣（對寬流（，自然）冷×卻高（ ）× 厚（ ））