![](/images/new-backgrounds/1175063/1750639x1.webp)
ELECTRICAL CHARACTERISTICS CURVES
Ch1
Ch2
Ch3
Ch4
Figure 9: Typical full load input characteristics at room temperature
Figure 10: Output voltage response to step-change in load current Iout2 (75%-50%-75% of Io, max; di/dt = 0.1A/µs) at Iout1=7.5A. Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Ch1=Vout2 (100mV/div), Ch2=Iout2 (7.5A/div), Ch3=Vout1 (100mV/div), Ch4=Iout1 (7.5A/div) Scope measurement should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module.
Ch1 | Ch1 |
| |
Ch2 | Ch2 |
Ch3 | Ch3 |
| |
Ch4 | Ch4 |
Figure 11: Output voltage response to step-change in load current Iout1 (75%-50%-75% of Io, max; di/dt = 0.1A/µs) at Iout2=7.5A. Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Ch1=Vout2 (100mV/div), Ch2=Iout2 (7.5A/div), Ch3=Vout1 (100mV/div), Ch4=Iout1 (7.5A/div) Scope measurement should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module.
Figure 12: Output voltage response to step-change in load current Iout2 and Iout1 (75%-50%-75% of Io, max; di/dt = 0.1A/µs). Load cap: 10µF, tantalum capacitor and 1µF ceramic capacitor. Ch1=Vout2 (100mV/div), Ch2=Iout2 (7.5A/div), Ch3=Vout1 (100mV/div), Ch4=Iout1 (7.5A/div) Scope measurement should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module.
6
DS_Q48DR1R533_03152007