Delta Electronics S48SA manual LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILE, Temp, Time

LEADED (Sn/Pb) PROCESS RECOMMEND TEMP. PROFILE

Temperature (°C )

250

200

150

100

50

Ramp-up temp. 0.5~3.0°C /sec.

2nd Ramp-up temp. Peak temp. Pre-heat temp. 1.0~3.0°C /sec. 210~230°C 5sec.

140~180°C 60~120 sec.

Cooling down rate <3°C /sec.

Over 200°C 40~50sec.

0

60	120	180	240	300
	Time ( sec. )

Note: The temperature refers to the pin of S48SA, measured on the pin 1 (+Vout ) joint.

LEAD FREE (SAC) PROCESS RECOMMEND TEMP. PROFILE

.
Temp	Peak Temp. 240 ~ 245 ℃
217℃		Ramp down
200℃		max. 4℃/sec.
150℃	Preheat time
	100~140 sec.	Time Limited 90 sec.
	Ramp up	above 217℃
25℃	max. 3℃/sec.
		Time

Note: The temperature refers to the pin of S48SA, measured on the pin 1 (+Vout ) joint.

11

DS_S48SA05006_06022006