Learning function
If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit.
Press the power ON/SOURCE button and the |
|
1 OFF button simultaneously. | POWER |
ON / |
ENGLISH
System call
The included remote control unit is equipped with a system call function allowing a series of remote control signals to be transmitted by pressing a single button.
This function can be used for example to turn on the amplifier’s power, select the input source, turn on the monitor TV’s power, turn on the source component’s power and set the source to the play mode, all at the touch of a button.
• “SET UP” appears on the remote control | 1, 5, 8 | OFF | SOURCE |
| |||
|
| REMOTE CONTROL UNIT | |
unit’s display. |
|
|
|
|
| TV | CD CDR/MD/ TAPE RECEIVER |
(1) System call buttons |
The buttons that can be used for the system call |
function are shown on the diagram at the right. |
| POWER |
OFF | ON / |
SOURCE | |
| |
| REMOTE CONTROL UNIT |
| OFF | ON / |
| SOURCE | |
|
| |
2 | ENTER | Press the ENTER button. |
SHIFT |
| |
3 | Use the D and H cursor buttons to display | |
“LEARN” on the remote control unit’s display, | ||
then press the ENTER button.
•“SEL MODE” is displayed.
| VCR DBS/CABLE | VDP | DVD | |
| DISPLAY |
|
| MENU |
| SURR. |
|
| OSD |
| PARA. |
|
| |
| SETUP |
|
| RETURN |
3, 4 |
| TUNING |
| A/B |
|
|
| MEMORY | |
BAND | MODE | |||
| CHANNEL |
|
| VOLUME |
| + | TUNING |
| + |
2, 3, 4 |
|
| ||
SKIP | ENTER |
| ||
- | SHIFT |
| - | |
| SKIP | MUTING |
| |
| TUNER | PHONO |
| CD |
| 1 | 2 |
| 3 |
| CDR/TAPE | VDP |
| DVD |
| 4 | 5 |
| 6 |
| TV/DBS | |||
| 7 | 8 |
| 9 |
| TV/ | 0 |
| +10 |
| VCR |
| ||
| RDS | PTY |
| RT |
| TEST | SPEAKER | OUTPUT | |
| TONE | |||
|
| SURROUND |
| |
|
| DSP |
| 5CH / 7CH |
|
| SIMU. |
| STEREO |
| 6.1 / 7.1 | DIRECT |
| STEREO |
System call signals can be stored at different |
buttons according to the mode. System call |
signals can be stored at a maximum of 6 buttons |
other than the CALL 1 and CALL 2 buttons. |
29 successive operations can be set at each of |
these buttons. |
(2) Storing system call signals |
1 | Press the power ON/SOURCE button and the |
OFF button at the same time. “SET UP” |
appears on the remote control unit’s display.
TV | CD | CDR/MD/ TAPE RECEIVER | ||
VCR | DBS/CABLE | VDP | DVD | |
DISPLAY |
| MENU | ||
SURR. |
|
| OSD | |
PARA. |
|
| ||
SETUP |
|
|
| RETURN |
|
| TUNING |
| A/B |
|
|
|
| MEMORY |
| BAND |
| MODE | |
CHANNEL |
|
|
| VOLUME |
+ |
| TUNING |
| + |
|
|
| ||
SKIP |
| ENTER |
| |
- |
| SHIFT |
| - |
SKIP |
| MUTING |
| |
TUNER PHONO CD
1 2 3
CDR/TAPE VDPDVD
TUNING
ENTER
BANDMODE
SHIFT
TUNING
| INPUT |
|
MODE | ANALOG | EXT.IN |
SYSTEM CALL |
| |
CALL 1 | CALL 2 | BACKLIGHT |
| OFF | ON / |
| SOURCE | |
2 | ENTER | Press the ENTER button. |
| ||
|
|
4 | 5 | 6 |
TV/DBS | ||
7 | 8 | 9 |
TV/ | 0 | +10 |
VCR | ||
RDS | PTY | RT |
TEST | SPEAKER | OUTPUT |
TONE | ||
| SURROUND |
|
DOLBY/DTS | DSP | 5CH / 7CH |
SURROUND | SIMU. | STEREO |
6.1 / 7.1 | DIRECT | STEREO |
SURROUND | ||
| INPUT |
|
4 | Use the D and H cursor buttons to select the | 6 | Point the remote control units directly at each |
mode for the button to be “learned”, then press | other and press and hold in the button on the | ||
| the ENTER button. |
| other remote control unit which you want to |
| • “SELECT KEY” is displayed. |
| “learn”. |
TUNING
ENTER
BAND | SHIFT | Other remote |
MODE |
| |
| TUNING | control unit |
| SHIFT |
3 | Use the D and H cursor buttons to display “SYS |
CALL” on the remote control unit, then press |
the ENTER button.
•Display “SYS MODE” on the remote control unit’s display.
MODE | ANALOG | EXT.IN |
SYSTEM CALL |
| |
CALL 1 | CALL 2 | BACKLIGHT |
|
| POWER |
1 | OFF | ON / |
SOURCE | ||
|
REMOTE CONTROL UNIT
5 | Press the button to be | “learned” while |
“SELECT KEY” is displayed. | “NOW LEARN” |
appears.
• “NOT VALID” is displayed if a button that cannot be “learned” is pressed.
• To cancel, press the power ON/SOURCE | ||
button and the OFF button simultaneously. | ||
OFF | ON / | |
SOURCE | ||
| ||
7 | “COMPLETE” appears on the remote control |
unit’s display and learning is completed. | |
| • “SELECT KEY” is displayed. Other keys can |
| be “learned” by repeating steps 5 to 7. |
|
|
8 | To cancel the learning mode, press the power |
ON/SOURCE button and the OFF button |
simultaneously again.
Registering is not possible in the receiver mode.
| TUNING |
| ENTER |
BAND | MODE |
| SHIFT |
| TUNING |
4 | When “SYS MODE” is displayed, the remote | |||
control unit’s display switches as shown below | ||||
| each | time | the D and H cursor buttons are | |
| pressed. |
|
| |
|
| TUNING |
|
|
| BAND | MODE | SYS MODE | SYS CALL 1 |
|
|
| ||
|
| TUNING | SYS CALL 2 | |
When “SYS CALL 1” or “SYS CALL 2” is selected, the signals are stored at the SYSTEM CALL 1 and CALL 2 buttons (green), regardless
| TV | CD | CDR/MD/ TAPE RECEIVER | ||
7 | VCR | DBS/CABLE | VDP | DVD | |
| DISPLAY |
|
| MENU | |
| SURR. |
|
| OSD | |
| PARA. |
|
| ||
| SETUP |
|
|
| RETURN |
3, 4, 5 |
|
| TUNING |
| A/B |
| BAND |
| MODE | ||
|
|
|
|
| MEMORY |
| CHANNEL |
|
|
| VOLUME |
| + |
| TUNING |
| + |
2, 3, 5, 6, 8 |
|
|
| ||
SKIP |
| ENTER |
| ||
- |
| SHIFT |
| - | |
| SKIP |
| MUTING |
| |
| TUNER | PHONO |
| CD | |
| 1 |
| 2 |
| 3 |
| CDR/TAPE | VDP |
| DVD | |
| 4 |
| 5 |
| 6 |
| TV/DBS | ||||
| 7 |
| 8 |
| 9 |
| TV/ |
| 0 |
| +10 |
| VCR |
|
| ||
| RDS |
| PTY |
| RT |
| TEST |
| SPEAKER | OUTPUT | |
| TONE | ||||
|
| SURROUND |
| ||
|
|
| DSP |
| 5CH / 7CH |
|
|
| SIMU. |
| STEREO |
| 6.1 / 7.1 | DIRECT |
| STEREO | |
|
|
| INPUT |
|
|
| MODE | ANALOG |
| EXT.IN | |
|
| SYSTEM CALL |
|
| |
| CALL 1 | CALL 2 |
| BACKLIGHT | |
OFF | ON / | |
SOURCE | ||
|
of the mode. When the enter button is pressed, the button registering mode (step 6) is set.
To register at other buttons, select “SYS MODE” then press the enter button.
•After “SEL MODE” is displayed on the remote control unit’s display, the mode last set is displayed.
19