ENGLISH
5 | Use the D and H cursor buttons to select the | 7 | q Press the mode selector button according to | ||||
mode for the button at which the system call |
| the button with the remote control signals to | |||||
| signals are to be registered, then press the |
|
| be registered. |
| ||
| ENTER button. |
|
| TV | CD CDR/MD/ TAPE RECEIVER | ||
|
| TUNING |
|
| VCR | DBS/CABLE VDP | DVD |
|
|
|
|
| |||
|
| ENTER |
|
|
|
|
|
| BAND | MODE |
|
|
|
|
|
|
| SHIFT |
|
|
|
|
|
|
| TUNING |
| w Press the buttons with the remote control | |||
|
|
|
| ||||
|
|
|
|
| signals to be registered one at a time. | ||
6 | ENTER | “SELECT KEY” is displayed. Press | 8 | ENTER | Press the ENTER button. | ||
SHIFT | the button at which the system call | SHIFT | • “COMPLETE” | appears on the | |||
|
| signals are to be registered, then |
|
| remote control unit’s display and | ||
|
| press the ENTER button. |
|
| registration is completed. | ||
•“ENTER KEYS” is displayed, then the mode display appears.
NOTES:
•The remote control signals of the buttons pressed while registering the system call signals are emitted, so be careful not to operate the components accidentally (cover the remote sensors, for example).
•If you exceed the number of signals that can be registered, “FULL” appears on the remote control unit’s display and only the number of signals that can be registered are registered (up to 29 operations).
(3)Using the system call function
1 | Press the button at which the system call signals have been stored. |
| • The stored signals are transmitted successively. |
|
|
4 | Use the D and H cursor buttons to display |
“RESET SYS” on the remote control unit, then | |
| press the ENTER button. |
| • “SYS SEL” appears on the remote control |
unit’s display.
TUNING
ENTER
BANDMODE
SHIFT
TUNING
The remote control unit’s display switches as shown below each time the D and H cursor buttons are pressed.
RESET PRE |
|
| RESET LRN |
| |||
RESET ALL |
|
| RESET SYS |
|
|
5 | TUNING |
| Press the D and H cursor buttons |
|
| to select the system call setting | |
| BAND | MODE | to be reset. |
TUNING
The remote control unit’s display switches as shown below each time the D and H cursor buttons are pressed.
SYS MODE
SYS CALL 1
SYS CALL 2 
qTo reset CALL 1 or CALL 2, select “SYS CALL 1” or SYS CALL 2”, then press the ENTER button.
ENTER
SHIFT
wTo reset system call settings registered at other buttons, select “SYS MODE”, press the ENTER button, press the mode button at which the button is registered, then press the ENTER button again.
| ENTER |
| SHIFT |
6 | “CONFIRM” is displayed. To reset the setting, |
press the ENTER button while “CONFIRM” is |
displayed.
•“SYS SEL” appears on the remote control unit’s display.
ENTER
SHIFT
(2) Resetting the preset memory
| Resetting |
(1) Resetting the system call buttons | |
|
|
1 | Press the power ON/SOURCE button and the |
OFF button at the same time. | |
•“SET UP” appears on the remote control unit’s display.
| OFF | ON / | |
| SOURCE | ||
|
|
| |
2 | ENTER | Press the ENTER button. | |
SHIFT |
| ||
3 | Use | the D and H cursor buttons to display | |
“RESET” on the remote control unit, then press | |||
| the ENTER button. | ||
|
| TUNING |
|
|
|
| ENTER |
| BAND |
| MODE |
|
|
| SHIFT |
TUNING
|
|
|
| POWER |
1 | OFF |
|
| ON / |
|
| SOURCE | ||
|
|
| ||
| REMOTE CONTROL UNIT | |||
| TV | CD | CDR/MD/ TAPE RECEIVER | |
| VCR DBS/CABLE VDP | DVD | ||
| DISPLAY |
| MENU | |
| SURR. |
|
| OSD |
| PARA. |
|
| |
| SETUP |
|
| RETURN |
3, 4, 5 |
|
| TUNING | A/B |
BAND | MODE | |||
|
|
|
| MEMORY |
| CHANNEL |
|
| VOLUME |
| + |
| TUNING | + |
2, 3, 4, 5, 6 |
|
| ||
SKIP |
| ENTER | ||
- |
| SHIFT | - | |
| SKIP |
| MUTING | |
| TUNER |
| PHONO | CD |
| 1 |
| 2 | 3 |
| CDR/TAPE |
| VDP | DVD |
| 4 |
| 5 | 6 |
| TV/DBS | |||
| 7 |
| 8 | 9 |
| TV/ |
| 0 | +10 |
| VCR |
| ||
| RDS |
| PTY | RT |
| TEST |
| SPEAKER | OUTPUT |
| TONE |
| ||
|
| SURROUND |
| |
|
|
| DSP | 5CH / 7CH |
|
|
| SIMU. | STEREO |
| 6.1 / 7.1 |
| DIRECT | STEREO |
|
|
| INPUT |
|
| MODE |
| ANALOG | EXT.IN |
| SYSTEM CALL |
| ||
| CALL 1 |
| CALL 2 | BACKLIGHT |
1 | Press the power ON/SOURCE button and the | ||
OFF button at the same time. | |||
| • “SET UP” appears on the remote control | ||
| unit’s display. |
| |
| OFF | ON / | |
| SOURCE | ||
|
|
| |
2 | ENTER | Press the ENTER button. | |
|
| ||
SHIFT |
| ||
3 | Use | the D and H cursor buttons to display | |
“RESET” on the remote control unit, then press | |||
| the ENTER button. | ||
|
| TUNING |
|
|
|
| ENTER |
| BAND | MODE |
|
|
|
| SHIFT |
TUNING
|
|
|
| POWER |
1 | OFF |
|
| ON / |
|
| SOURCE | ||
|
|
| ||
| REMOTE CONTROL UNIT | |||
| TV | CD | CDR/MD/ TAPE RECEIVER | |
| VCR DBS/CABLE VDP | DVD | ||
| DISPLAY |
| MENU | |
| SURR. |
|
| OSD |
| PARA. |
|
| |
| SETUP |
|
| RETURN |
3, 4, 5 |
|
| TUNING | A/B |
BAND | MODE | |||
|
|
|
| MEMORY |
| CHANNEL |
|
| VOLUME |
| + |
| TUNING | + |
2, 3, 4, 6, 7 |
|
| ||
SKIP |
| ENTER | ||
- |
| SHIFT | - | |
| SKIP |
| MUTING | |
| TUNER |
| PHONO | CD |
| 1 |
| 2 | 3 |
| CDR/TAPE |
| VDP | DVD |
| 4 |
| 5 | 6 |
| TV/DBS | |||
| 7 |
| 8 | 9 |
| TV/ |
| 0 | +10 |
| VCR |
| ||
| RDS |
| PTY | RT |
| TEST |
| SPEAKER | OUTPUT |
| TONE |
| ||
|
| SURROUND |
| |
|
|
| DSP | 5CH / 7CH |
|
|
| SIMU. | STEREO |
| 6.1 / 7.1 |
| DIRECT | STEREO |
|
|
| INPUT |
|
| MODE |
| ANALOG | EXT.IN |
| SYSTEM CALL |
| ||
| CALL 1 |
| CALL 2 | BACKLIGHT |
20