ENGLISH

Connecting a Video Component Equipped with Color Difference (Component

- Y, PR/CR, PB/CB) Video Jacks (DVD Player)

•When making connections, also refer to the operating instructions of the other components.

•The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.

•The AVR-3802’s on-screen display signals are not output from the color difference (component) video output jacks (MONITOR OUT).

•Some video sources with component video outputs are labeled Y, CB, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These terms all refer to component video color difference output.

Connecting the antenna terminals

 

DIRECTION OF

AM LOOP

 

BROADCASTING

 

ANTENNA

 

STATION

 

(Supplied)

 

 

 

FM ANTENNA

 

75 Ω /ohms

300 Ω /ohms

 

COAXIAL

FEEDER

 

CABLE

CABLE

 

FM ANTENNA

 

ADAPTER

 

 

COMPONENT VIDEO OUT

DVD player

B

Connecting a DVD player

DVD IN jacks

(Supplied)

CRCBY

• Connect the DVD player’s color difference (component) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω /ohms coaxial video pin-plug cords.

•In the same way, another video source with component video outputs such as a TV/DBS tuner, etc., can be connected to the TV/DBS color difference (component) video jacks.

Monitor TV

Connecting a monitor TV

AM OUTDOOR

ANTENNA

FM INDOOR

300 Ω /ohms

GROUND

ANTENNA

COMPONENT

VIDEO IN

Y CB CR

MONITOR OUT jack

• Connect the TV’s color difference (component)

video input jacks (COMPONENT VIDEO INPUT)

to the COMPONENT MONITOR OUT jack using

75 Ω /ohms coaxial video pin-plug cords.

(Supplied)

•An F-type FM antenna cable plug can be connected directly.

•If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter.

• The color difference input jacks may be indicated differently on some

TVs, monitors or video components (“CR, CB and Y”, “R-Y, B-Y and Y”,

“Pr, Pb and Y”, etc.). For details, carefully read the operating instructions

included with the TV or other component.

AM loop antenna assembly

 

 

Connect to the AM

1

2

antenna terminals.

3

 

 

 

Remove the vinyl tie

Bend in the reverse

 

and take out the

4

connection line.

direction.

a. With the antenna on top any stable

Mount

surface.

b. With the antenna attached to a wall.

Installation hole Mount on wall, etc.

FM antenna adopter assembly

 

 

75 Ω /ohms COAXIAL CABLE

Open the cover

 

 

SHUT

 

 

 

 

 

PULL

 

 

 

 

CLAMP

 

 

CLAMP 14mm

19mm

 

 

 

PULL ANTENNA ADAPTER

9mm

14mm

 

 

 

REMOVE

 

5mm

5mm

 

 

 

 

 

3C-2V

5C-2V

CLAMP

 

 

 

 

Connection of AM antennas

1. Push the

2. Insert the 3. Return the

lever.

 

conductor.

lever.

Notes:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

6