2 | ENTER | Switch to the speaker configuration screen. |
SHIFT |
|
ENGLISH
Selecting the surround speakers for the different surround modes
This screen is displayed when using both surround speakers A and B.
•At this screen preset the surround speakers to be used in the different surround modes.
3 | TUNING |
BAND | MODE |
| TUNING |
TUNING
BANDMODE
TUNING
Set whether or not speakers are connected and, if so, their size parameters.
•To select the speaker
•To select the parameter
Center Sp.
Front Sp.
1 | TUNING |
| When either “Large” or “Small” has been set for both |
|
| speakers A and B on the System Setup Menu (when using | |
| BAND | MODE | both A and B surround speakers), the surround speaker |
TUNING | setting screen appears. |
| Select the surround speakers to be used in the different |
| surround modes. |
•To select the surround mode
•To select the surround speaker
TUNING | A: | When using surround speakers A |
| ||
BANDMODE | B: | When using surround speakers B |
| A+B: | When using both surround speakers A and B |
Subwoofer
Surround Sp. A
Surround back Sp.
Surround Sp. B
4 | ENTER | Press the ENTER button to finalize the settong. |
SHIFT |
|
NOTE:
•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below frequency set for the Crossover Frequency mode and below) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
•Parameters
Large.................Select this when using speakers that have sufficient performance for reproducing bass
| sound below the frequency set for the Crossover Frequency mode. |
Small ................. | Select this when using speakers that do not have sufficient performance for reproducing |
| bass sound below the frequency set for the Crossover Frequency mode. When this is set, |
| bass sound with a frequency below the frequency set for the Crossover Frequency mode |
| is sent to the subwoofer. |
| When this setting is selected, low frequencies of below the frequency set for the Crossover |
| Frequency mode are assigned to the subwoofer. |
None…… .......... | Select this when no speakers are installed. |
Yes/No… ........... | Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed. |
2spkrs/1spkr ..... | Set the number of speakers to be used for the surround back channel. |
If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.
For the majority of speaker system configurations, using the Small setting for all five main speakers and Subwoofer On with a connected subwoofer will yield the best results.
TUNING |
2 | ENTER | Enter the setting. |
SHIFT | When “Front” is set to “Large” and “Subwoofer” is set to “Yes”, the set switches to the |
subwoofer mode.
Speaker type setting when using both surround speakers A and B
If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.
Setting the Crossover Frequency and Subwoofer mode
This screen is displayed when using a subwoofer.
•Set the crossover frequency and subwoofer mode according to the speaker system being used.
1 |
| TUNING | Select the “Crossover Frequency” mode. |
| BAND | MODE | |
|
| TUNING |
|
|
| TUNING | Select the Frequency. |
| BAND | MODE | |
|
| TUNING |
|
2 |
| TUNING | Select the “Subwoofer Mode”. |
| BAND | MODE | |
|
| TUNING |
|
|
| TUNING | Select the setting. |
| BAND | MODE | |
|
| TUNING |
|
3 | ENTER | Enter the setting. | |
SHIFT | The System Setup Menu reappears. | ||
11