ENGLISH
20 SPECIFICATIONS
2 Audio section |
|
|
|
|
|
|
• Power amplifier |
|
|
|
|
|
|
Rated output: | Front: | 70 | W + 70 W | (8 Ω | /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) | |
|
| 100 | W + 100 W (6 Ω | /ohms, 1 kHz with 0.7 % T.H.D.) | ||
| Center: | 70 | W | (8 Ω | /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) | |
|
| 100 | W | (6 Ω | /ohms, 1 kHz with 0.7 % T.H.D.) | |
| Surround: | 70 | W + 70 W | (8 Ω | /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) | |
|
| 100 | W + 100 W (6 Ω | /ohms, 1 kHz with 0.7 % T.H.D.) | ||
Output terminals: | Front: | A or B | 16 to 16 Ω | /ohms |
|
|
| A + B | 12 to 16 Ω | /ohms or more |
|
| Center/Surround: | 16 to 16 Ω | /ohms |
| |
• Analog |
|
|
|
|
|
LINE input - PRE OUT |
|
|
|
|
|
Input sensitivity/input impedance: | 200 mV/47 kΩ /kohms |
|
| ||
Frequency response: | 10 Hz ~ 100 kHz: +1, |
| |||
S/N ratio: | 98 dB |
| |||
2 Video section |
|
|
|
|
|
• Standard video jacks |
|
|
|
|
|
Input/output level and impedance: | 1 V |
|
|
| |
Frequency response: | 5 Hz ~ 10 MHz — +1, |
|
| ||
• |
|
| — 1 |
|
|
Input/output level and impedance: | Y (brightness) signal | /ohms |
| ||
| C (color) signal — 0.286 |
| |||
Frequency response: | 5 Hz ~ 10 MHz — +1, |
|
| ||
2 Tuner section |
|
| /ohms, 0 dBf = 1 x |
| |
| [FM] (note: µV at 75 Ω | [AM] | |||
Receiving range: | 87.50 MHz ~ 108.00 MHz |
| 522 kHz ~ 1611 kHz | ||
Usable sensitivity: | 1.0 µV (11.2 dBf) |
|
| 18 µV | |
50 dB quieting sensitivity: | MONO | 1.6 µV (15.3 dBf) |
|
| |
| STEREO | 23 µV (38.5 dBf) |
|
| |
S/N ratio: | MONO | 80 dB |
|
| |
| STEREO | 75 dB |
|
| |
Total harmonic distortion: | MONO | 0.15 % (1 kHz) |
|
| |
| STEREO | 0.3 % (1 kHz) |
|
| |
2 General |
|
|
|
|
|
Power supply: | AC 230 V, 50 Hz |
|
|
| |
Power consumption: | 210 W |
|
|
|
|
Maximum external dimensions: | 434 (W) x 147 (H) x 417 (D) mm |
|
| ||
Mass: | 10.4 kg |
|
|
|
|
2Remote control unit
Batteries: | R6P/AA Type (two batteries) |
External dimensions: | 55 (W) x 225 (H) x 34.5 (D) mm |
Mass: | 165 g (including batteries) |
For purposes of improvement, specifications and design are subject to change without notice.
29