For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).

d

Dolby Digital Setup

Set dynamic range for downmix playback of Dolby Digital
sources.
• Set this to “ON” if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.

f

Auto Surround Mode

Make setting for memorizing surround mode setting for each
input signal type.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
[Selectable items]
ON : Memorize settings. Most recently stored surround mode is
automatically selected.
OFF : Do not memorize settings. Surround mode does not change
according to input signal.
[Selectable items]
ON : Compression is used. Select this if sound from front
speakers is distorted.
OFF : Do not use compression. This is the recommended
setting.



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH

g

EQ Preset

Set MultEQ related settings and Manual EQ beforehand.

EQ Customize

When MultEQ® and Manual EQ you are not using are preset, MultEQ
can be skipped when selected on the main unit or remote control
unit.

n Before running Auto Setup

[Selectable items]
Manual : Used Not Used
n After running Auto Setup
[Selectable items]
Audyssey Byp. L/R : Used Not Used
Audyssey Flat : Used Not Used
Manual : Used Not Used

Direct Mode

Select “MultEQ” use for DIRECT or PURE DIRECT mode.
[Selectable items]
ON : Use “MultEQ”.
OFF : Do not use “MultEQ”.

Manual EQ

Adjust tonal quality for each speaker using graphic equalizer.
n Default
Resets the settings to the default values.
n Base Curve Copy
Copy the MultEQ “Audyssey Flat” correction curve.
[Selectable items]
Yes No
n Adjust CH
q Select speaker adjustment method.
[Selectable items]
Each CH : Adjust tonal quality for each speaker separately.
L/R CH : Adjust tonal quality for each L/R speaker pair.
All CH : Adjust tonal quality for all speakers together.
w
Select the speaker and frequency band and adjust the level.
[Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz
2kHz 4kHz 8kHz 16kHz
[Variable range] –20dB ~ 0dB ~ +6dB
“Base Curve Copy” is displayed after the auto setup procedure has
been performed.
Specifications