Progressive Mode

Select optimum progressive mode for video material.
[Input source] DVD HDP TV/CBL VCR V.AUX
[Selectable items]
Auto : Automatically detect video material type.
Video1 : Select mode suitable for video playback.
Video2 : Select mode suitable for video and 30-frame film material
playback.
This can be set when “i/p Scaler” is set to “A to H”.

Aspect

This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source] DVD HDP TV/CBL VCR V.AUX
[Selectable items]
Full : Output at 16:9 aspect ratio.
Normal : Output at 4:3 aspect ratio.
This can be set when “i/p Scaler” is set to “A to H”.
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).
• When a digital signal is properly input, the “ ” indicator lights on
the display. If the “ ” indicator does not light, check the digital
input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to “EXT.
IN”.
• Only set “PCM” and “DTS” when playing the respective signals.

Decode Mode

Set the decode mode for this source.
[Input source] CD CDR/TAPE DVD HDP TV/CBL VCR
V.AUX
[Selectable items]
Auto : Detect type of digital input signal and decode and play
automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This can be selected for input sources for which the menu “Assign”
setting is set to “HDMI In” or “Digital In” (vpage 35).
• Only set “PCM” and “DTS” when playing the respective signals.

Operating from the main unit or remote control

unit
Press <INPUT MODE> or [INPUT].
Each time you press the button, the input mode display will change.
Auto HDMI Digital
AnalogEXT. IN
z1: This can be selected for input sources for which the menu
“Assign” setting is set to “HDMI In”.
z2: This can be selected for input sources for which the menu
“Assign” setting is set to “Digital In” (vpage 35).
z1z2

g Input Mode

Make input mode and decode mode settings for this source.
The selectable input modes depend on the input source and
“Assign” setting (vpage 29).

Input Mode

Set the input mode for this source.
[Input source] TUNER PHONO
[Selectable items]
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
[Input source] CD CDR/TAPE DVD HDP TV/CBL VCR
V.AUX
[Selectable items]
Auto : Automatically detect input signal and perform playback.
HDMI z1: Play only signals from HDMI input. (Excluding CD and
CDR/TAPE)
Digital z2 : Play only signals from digital input.
Analog : Play only signals from analog input.
EXT. IN : Play only signals from EXT. IN input.
z1: This can be selected for input sources for which the menu
“Assign” setting is set to “HDMI In”.
z2: This can be selected for input sources for which the menu
“Assign” setting is set to “Digital In” (vpage 35).



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications