Denon AVR-2309 1 2, 3, 2, 5, 4, 2, 1, 3, 1, 3

1Set [SOURCE CONTROL 1] to “AUDIO”.

2Set [SOURCE CONTROL 2] to the position for the

component to be operated (CD, iPod/NETWORK or

TUNER).

3Operate the audio component.

b For details, refer to the component’s operating instructions.

b While this remote control is compatible with a wide range of

infrared controlled components, it may be the case that some

component models cannot be operated with this remote control.

1Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.

b Set to the AUDIO side for the CD position, and to the VIDEO side

for the DVD/HDP, VCR, SAT/CABLE or TV position.

2Set [SOURCE CONTROL 2] to the component to be

registered.

3Press [ZONE2 OFF] and [MAIN ON] at the same time.

The indicator starts ﬂashing.

4Press [NUMBER] and input the 3-digit number of the

brand of the component to be preset. The numbers

are shown in the Preset Code Table (vEnd of this

manual).

5To store the codes of another component in the

memory, repeat steps 1 to 4.

• The signals for the pressed buttons are emitted while setting the

preset memory. To avoid accidental operation, cover the remote

control unit’s transmitting window while setting the preset

memory.

• Depending on the model and year of manufacture, this function

cannot be used for some models, even if they are of makes listed in

the list of preset codes.

• Some manufacturers use more than one type of remote control code.

Refer to the included list of preset codes to change the number and

verify correct operation.

• The preset memory can be set for one component only among the

following: DVD/HDP and SAT/CABLE.

• VDP (Video Disc Player) can be preset when [SOURCE CONTROL 2]

is set to “DVD/HDP”.

1Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.

b Set to the AUDIO side for the CD position, and to the VIDEO side

for the DVD/HDP, VCR, SAT/CABLE or TV position.

2Set [SOURCE CONTROL 2] to the component you want

to operate.

3Operate the component.

b For details, refer to the component’s operating instructions.

b Some models cannot be operated with this remote control unit.

Operating DENON Audio Components

Presetting

• DENON and other makes of components can be operated by

setting the preset memory.

• Operation is not possible for some models.

Operating Preset Components

Depending on the model and year of manufacture of your equipment,

some buttons may not operate.

[SOURCE

CONTROL 1]

[SOURCE

CONTROL 2]

[ZONE2 OFF]

[NUMBER]

[MAIN ON]

[Front]

[Rear]

Remote Control Unit Operations



Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting

ENGLISH

Speciﬁcations