ENGLISH
Advanced Setup – Part 1
Video Setup
Setting the HDMI In Assignment
The HDMI input terminals are assigned for the different input sources. Select the HDMI audio signal playback method.
1 Press D H to select “Video Setup”, then press ENTER.
2 Press D H to select “HDMI In Assign”, then press
ENTER.
3 Pressto set.D H to select the input source, then press F G
HDMI1, HDMI2:
Assign the “HDMI1” or “HDMI2” input terminal to the input function.
4 Press D H to select “Audio”, then press F G to select where to output the audio signals.
AMP:
Output the speakers connected to the
TV:
Output the TV connected to the
5 If no audio signal is included in the input signal: Press D H to select the input source, then press F G to set.
EXT. IN, ANALOG:
If there is no HDMI audio signal, the signal automatically switches to the input from the set terminal.
6 Press ENTER.
1
2
3
4 
5 
Compatible with HDMI1 and HDMI2.
•If a monitor is connected with an HDMI cable but the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor from the
•Audio signals input from the analog and digital terminals are not output to the TV.
•With HDMI, the video and audio signals are transferred simultaneously. When HDMI is assigned to an input source, the digital audio input assignment switches to HDMI along with the video input.
When this setting is made for input sources to which a digital audio input (COAXIAL or OPTICAL) is previously assigned, the digital audio assignment is set to HDMI.
In this case, reassign the digital input using the procedure described
at “Digital In Assign” ( 
page 49).
•It is not possible to make the “HDMI In Assignment” settings for the function assigned at “iPod Assignment”.
Advanced Setup – Part 1
Setting the Component In Assignment
This assigns the component video input terminals for the different input sources.
1 Press D H to select “Component In Assign”, then press ENTER.
2 Pressto set.D H to select the input source, then press F G
Assign the
3 Press ENTER.
1
2 
•It is not possible to make the “Component In Assignment” settings for the function assigned at “iPod Assignment”.
53
ENGLISH