
Advanced Setup – Part 1
Setting the Video Convert
This sets whether or not to use the video conversion function.
1 Press D H to select “Video Convert”, then press ENTER.
2 Pressto set.D H to select the input source, then press F G
ON, OFF:
Select “ON” to use the video conversion function, “OFF” if you do not want to use it.
3 Press ENTER.
1
2
•If the resolution of the input component video signal is something other than 480i/576i,
the page 15, 16).
•When a
•When the video conversion function has been used, information such as that of text broadcasts which has been added to the video signal might not be output. If this happens, please set the conversion mode to “OFF”.
Setting the HDMI Out Setup
Set whether or not to
1 Press D H to select “HDMI Out Setup”, then press
ENTER.
2 Press F to select “ON”.
3 Press D H to select the item, then press F G to set.
Analog to HDMI Convert:
•OFF:
This is the factory default setting.
Setting for not converting analog video signals into HDMI signals.
•ON:
Setting for converting analog video signals into HDMI signals.
A monitor compatible with a resolution of 480i is required in order to use this function.
The on screen display signals of
Analog video signals are converted into digital video signals with the same resolution with which they were input and are then output from the HDMI terminal.
Example:
Analog signals input with a resolution of 480i are output from the HDMI terminal with a resolution of 480i.
Color Space:
•Y Cb Cr:
The Y Cb Cr format video signals is output via the HDMI output terminal.
•RGB:
The RGB format video signals is output via the HDMI output terminal.
RGB Mode Setup:
•Normal:
Signals are output via the HDMI output terminal with a digital RGB video range (data range) of 16 (black) to 235 (white).
•Enhanced:
Signals are output via the HDMI output connector with a digital RGB video range (data range) of 0 (black) to 255 (white).
When the HDMI terminals are connected, the black may seem to stand out, depending on the TV or the monitor. In this case, set this to “Enhanced”.
54
ENGLISH
Advanced Setup – Part 1
4 Press ENTER.
1
2
(When “ON” is selected)
•When “Y Cb Cr” is selected under “Color Space”, “RGB Mode Setup” will have no effect.
•“Color Space” and “RGB Mode Setup” are only displayed when “Analog to HDMI Convert” is set to “ON”.
•When connecting to an HDCP compatible monitor equipped with
•To view the on screen display using an HDMI monitor, set “Analog to HDMI Convert” at “HDMI Out Setup” to “ON” (default).
ENGLISH