ENGLISH
Advanced Setup – Part 1
Setting the Audio Delay
Adjust the time delay between the video and audio signals.
1 Press D H to select “Audio Delay”, then press ENTER.
2 Press F G to set.
0 ms ~ 200 ms:
Adjust the time delay.
With a movie source, for example, adjust so that the movement of the actors’ lips is synchronized with the sound.
3 Press ENTER.
1
2
•By default, this menu is not displayed when no digital signals are being input.
•To make this setting for the component video signal, select the delay time and turn the on screen display off, then check that the timing of the component video and audio match.
•The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (Front speaker setting “Large”, TONE DEFEAT “ON” and Room EQ “OFF”).
Advanced Setup – Part 1
Setting the On Screen Display (OSD)
Set whether or not to display the on screen display for indications other than the menu screens.
1 Press D H to select “On Screen Display”, then press
ENTER.
2 Press D H to select the item, then press F G to set.
Function/Mode Status:
•ON, OFF:
Select “ON” to display the on screen display when the input source is selected, “OFF” if you do not want to display it.
Master Volume Status:
•ON, OFF:
Select “ON” to display the on screen display when the main volume is adjusted, “OFF” if you do not want to display it.
Display Mode:
•Mode1:
Flickering is not prevented.
•Mode2:
Prevents flickering of the on screen display when there is no video signal.
Use this mode if the on screen display is not displayed in “Mode1”.
3 Press ENTER.
1
2
55
ENGLISH