
ENGLISH
Advanced Setup – Part 1
Setting the Auto Surround Mode
Set whether or not to store the surround mode last played for the input signal.
The surround mode used at last for the four types of input signals shown below is stored in the memory, and the signal is automatically played with that surround mode the next time it is input.
qAnalog and PCM
w
e
rPCM
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.
1 Press D H to select “Auto Surround Mode”, then press ENTER.
2 Press F G to set.
3 Press ENTER.
1
2
Setting the Manual Equalizer Setup
Adjust the tone of the various speakers while listening to the playback signals.
1 Press D H to select “Manual EQ Setup”, then press
ENTER.
2 Press F G to set, then press ENTER.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers can be adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3 Press F G to select the speaker.
The display changes as follows.
qSelect “L/R CH”
FL/FR
C
SBL/SBR
SL/SR
wSelect “Each CH”
FL
FR
C
(2 speakers)
SBR
SBL
SR
SL
SB
(1 speaker)
eSelect “All CH”
In this case, speaker selection is not performed.
4 Press D H to select the frequency, then press F G to adjust.
The level of the various frequencies can be adjusted between
5 Press ENTER.
57
Advanced Setup – Part 1
1 2
3
ENGLISH