
ENGLISH
6ROTATING INPUT SELECT SWITCHES
1.Disconnect the power.
2.Remove knobs from the Top Panel.
3.Remove the 6 screws attaching the Top Panel.
4.Remove the 2 screws attaching the Switch unit.
5.Rotate the Switch unit to the desired location.
6.Reinstall the 2 screws holding the Switch unit.
7.Reinstall the Top Panel and reattach knobs.
About the Cables
(For RCA PINJACK)
RCA pin plug
Cable 1 | Unbalanced |
(For BALANCED MASTER OUT) |
|
|
| ||
|
| Balanced | Cable 2 | Balanced (1/4” TS) | |
| Sleeve=GND |
| Sleeve=GND |
| |
| Ring=Cold |
| Ring=Cold | ||
| Tip=Hot |
|
| Tip=Hot | |
| (For MIC) |
|
|
|
|
| Balanced (1/4” TRS) | Cable 3 | Balanced | 1=GND | |
|
| ||||
|
|
| |||
|
|
|
|
| 2=Hot |
Switch unit | Sleeve=GND |
| 3=Cold | ||
Ring=Cold |
|
| |||
| Tip=Hot |
|
|
|
|
(For BALANCED MASTER OUT) |
|
|
| ||
2=Hot | 1=GND | Balanced | Cable 4 | Balanced (1/4” TRS) | |
|
| ||||
|
|
| |||
3=Cold |
| Sleeve=GND |
| ||
|
| Ring=Cold |
Tip=Hot
10