2INTRODUCTION

Thank you very much for purchasing the DENON DN-X100 DJ MIXER.

DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are certain to provide you with many hours of outstanding listening pleasure.

– TABLE OF CONTENTS –

ENGLISH

2PART NAMES AND FUNCTIONS (Refer to page 3.)

(1)Top panel

q MIC ON/OFF/TALKOVER switch

u GAIN

• When TALKOVER is selected , all signals except

• Adjusts the gain of each input channel.

the microphone level are decreased by 20 dB.

i MASTER LEVEL control

When at the ON or OFF position all signals

remain at their standard levels.

• Adjust the level of the MASTER output.

z MAIN FEATURES ...............................................

5

x PART NAMES AND FUNCTIONS ...................

5, 6

c CONNECTIONS ..................................................

7

2ACCESSORIES

Please check to make sure the following items are included with the main unit in the carton:

v SPECIFICATIONS................................................

8

b FADER START ....................................................

9

n ROTATING INPUT SELECT SWITCHES ...........

10

q Operating instructions.......................................

1

w AC adaptor ........................................................

1

(AA-26 : for AC 120 V, AA-27 : for AC 230 V)

 

wMIC EQ controls

•Contour the frequency response of the Mic input –12 dB to +12 dB.

•At the center position, sound is flat.

eMIC LEVEL control

• Adjust the level of Mic signal.

rSource EQ controls

•Contour the frequency response of the selected inputs.

HI and MID:

oMASTER BALANCE control

• Adjust the L/R balance of the MASTER outputs.

!0Headphone PAN control

• This function allows you to monitor the CUE

level as well as the MASTER output in your

headphones. A CUE Level may only be

monitored of the CUE signal is selected.

• Serves two purposes…In the STEREO mode it

changes the relative levels of the CUE and

MASTER mixed together in both ear cups. In

the SPLIT CUE mode it changes the balance

1MAIN FEATURES

1.2-Channel DJ Mixer

4 LINE, 2 PHONO, 1 Microphone systems and 2 MASTER outputs are provided independently.

2.VCA controlled Channel Fader and Crossfader

3.Channel Fader and Crossfader contour adjustable This feature allows adjusting the “shape” of the Crossfader and Channel fader response from a gentle curve for smooth to the steep pitch required for top performance cut and scratch effects.

4.Channel Fader and Crossfader Reverse

5.Channel Fader and Crossfader Start

The CD player can be started or stopped simply by increasing or decreasing the level of the Ch.fader or by using the Crossfader left to right or right to left. (This function can only be used when the DENON CD players DN-S3000, DN-S5000, DN- S1000 or etc. is connected to the DN-X100.)

6.Channel Reverse function

This function allows the left hand channel fader or right hand channel fader to control PGM1 or PGM2.

7.3-Band Equalizer/Gain

LOW, MID, HI and GAIN controls are available on every input channel.

8.4 direction placement for input selector

9.Microphone Talkover function

•Adjusts the high-tone and mid-tone sound –40 dB to +10 dB.

LOW:

•Adjusts the high-tone and mid-tone sound –40 dB to +6 dB.

NOTE:

Clipping may occur if adjustments are set to harsh.

tInput select switch

•Switches between the PHONO/LINE and LINE inputs.

•When the lever of switch is vertical position, the LINE2 or LINE4 input is selected.

•When the lever of switch is slope, the PHONO1/LINE1 or PHONO2/lINE3 input is selected.

•You can perform 4 direction placement. See page 10.

yCUE buttons

•These buttons are used to activates a channels “CUE” mode, the LED above the cue button will glow when cue mode is activated. Cue mode will send a channels incoming signal to the headphones.

between the monaural CUE sound in the left

and monaural MASTER sound in the right.

!1PHONES LEVEL control

• Adjusts the headphone output level.

!2SPLIT CUE button

•In the STEREO mode, the stereo sound of MASTER and CUE are fed to both ear cups. In the SPLIT CUE mode, the headphone circuit provides monaural CUE sound to the left and monaural MASTER sound to the right.

•When the Level Meter mode select switch is set to “MASTER”…In the STEREO mode, the meter indicates the stereo level in the L/R Master output. In the SPLIT CUE mode, the monaural CUE sound level is displayed on the left and the monaural MASTER sound level is displayed on the right.

•In the SPRIT CUE mode, the LED is lit.

!3Channel Fader

• Controls the channel output level.

5