Connections
Connecting the TRIGGER OUT jacks
Turn the DC 12 V voltage on and off for the individual functions.
ENGLISH
Connections
Connecting the AUDIO PRE OUT/MAIN IN terminals
| Premain amplifier or | ||
| Power amplifier | ||
A |
| (MAIN) | |
|
| ||
L | L | L | |
R | R | IN | |
R | |||
A |
|
| |
L | L | L | |
OUT | |||
R | R | ||
R | |||
Connecting the
This terminal is used for an external controller.
Perform the following operation before using an external controller connected to the
1. Press the ON/STANDBY button on the main unit and set the unit to the operating mode.
2. Perform the operation to turn off the power from the external control.
3. Check that the product has been set to the standby mode.
After checking the above, check the connections of the external controller. Operation is possible.
Connecting the power supply cord
| AC outlet | |
| (wall) | |
Power supply cord | AC 120 V, 60 Hz | |
(Supplied) | ||
|
AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A)) The power to the outlet is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit.
No power is supplied from this outlet when this unit’s power is at standby. Never connect equipment whose total power consumption exceeds 120 W (1 A).
NOTE:
•Insert the plugs securely. Incomplete connections will result in the generation of noise.
•Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other electrical appliances.
10
ENGLISH