Denon DRA-697CI manual 22

ENGLISH

Operation Operation

Multi zone music entertainment system

•When the outputs of the ZONE2 (ZONE3) OUT terminals are wired and connected to power amplifiers installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in which this unit and the playback devices are installed. (Refer to ZONE2 (ZONE3) on the diagram below.)

•When a sold separately room-to-room remote control unit is wired and connected between the MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3) using the remote control unit.

To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.

• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

Multi-zone playback using the ZONE2 and ZONE3 PREOUT terminals

¢When using the power amplifier as the MAIN ZONE output

•The DRA-697CI is equipped with pre-out terminals for which the volume is adjustable and video output terminals (composite) as the ZONE2 (ZONE3) output terminals, and variable output level as the ZONE2 (ZONE3) output terminals.

[System configuration and connections example]

Using external amplifier.

MAIN ZONE 2.1-channel system			ZONE2		ZONE3
	Monitor		Monitor	ZONE3	Monitor
				video out
			ZONE2
			video out
FL		FR
			Power		Power
		SW	Amplifer		Amplifer
DVD player	DRA-697CI
	Input
		ZONE2 audio out
		(Variable out)	ZONE	ZONE remote
			remote control unit	control unit
			(RC-1056)	(RC-1056)

	ZONE3 audio out (Variable out)
System remote
control unit (RC-1052)

: Multi source video signal cable

:Multi source audio signal cable

:Room-to-room remote control system (separately sold) control line

Refer to “Connections” ( page 9).

19

ENGLISH