Denon DRA-CX3 Operation, Turning the power on, Conducting playback, Adjusting the tone, Playing with higher quality sound (Pure Direct mode), nCanceling the standby mode:

ENGLISH

Getting
Started					FUNCTION
Connections
Operation	<ON/STANDBY / OFF>	VOLUME			<CD> <PRESET>
Troubleshooting	[POWER]		POWER
				MODE
			iPod	EDIT
					[EDIT]
	[TUNING]
Specifications		MENU /
	[ENTER]	SET	TU	CLEAR	[CLEAR]
	[CHANNEL]	CH	ENTER	CH	[CHANNEL]
	[TONE]	TONE	TU	BAND	[BAND]
	[TUNING]	CD	TUNER	PHONO
					[TUNER]

Operation

Turning the power on

Press <ON/STANDBY / OFF>.

b When the power is turned on, the function that was being used when the power was last turned off is selected (Last function memory).

nSetting the power to the standby mode:

Press [POWER].

nCanceling the standby mode:

Press [POWER] again.

nTurning the power off:

Press <ON/STANDBY / OFF>.

Power indicator
Power on∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red	Standby∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Orange

3Adjust the VOLUME.

b The volume can be adjusted within the range 0 to −90 dB to −∞. When set to −∞, the display reads “- -.- dB”.

Adjusting the tone

1Press [TONE] to select the tone parameter to be adjusted.

BASS TREBLE BALANCE

INPUT

BASS: Adjusts the bass sound.

TREBLE: Adjusts the treble sound.

BALANCE: Adjusts the left/right volume balance.

2When the bass or treble level or the balance is displayed, adjust pressing [CHANNEL].

FUNCTION	LINE 1 /	LINE 2	LINE 3
	iPod
	TIME		PURE
			DIRECT	[PURE DIRECT]
VOLUME
	MUTE		DIMMER

3$

About the button names in these explanations

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only:

Buttons on the main unit and remote control unit

Conducting playback

1Press FUNCTION to select the input function.>

CD PHONO LINE1 (iPod)

TUNER LINE3 LINE2

b The function can be switched directly to “TUNER” by pressing <PRESET>, to “CD” by pressing <CD>.

zThe “iPod” indicator is displayed when a Control Dock for iPod is connected. (“NO iPod” is displayed if no iPod is connected to the Control Dock for iPod.)

2Start playback on the selected component.

b For instructions on operating, see the operating instructions of the connected component.

Playing with higher quality sound (Pure Direct mode)

Press [PURE DIRECT] .

The display is turned off.

b The audio signals do not pass through the tone adjustment circuitry, so highly pure sound is played.

nCanceling the Pure Direct mode:

Press [PURE DIRECT] again.

When in the pure direct mode, the tone is set to “flat” and the balance to “center”. The tone and balance cannot be adjusted when this mode is selected.