ENGLISH

Getting

Connections

 

 

 

Started

 

 

 

 

 

 

 

Connections

NOTE

 

 

 

• Do not plug in the power cord until all connections have been completed.

 

 

 

 

• When making connections, also refer to the operating instructions of the other components.

 

• Be sure to connect the left and right channels properly (left with left, right with right).

 

Operation

• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Cable indications

 

 

 

Troubleshooting

 

 

 

Connect using the connection cables shown below.

 

 

 

 

 

 

Audio cables

 

Signal direction

 

Analog connections (Stereo)

 

Audio signal:

 

Specifications

L

L

Output

Input

 

 

 

 

 

 

R

R

 

 

 

RCA pin-plug cable

 

 

 

 

Speaker connections

 

Input

Output

 

Speaker cables

 

 

 

Speaker connections

Speakers

- 3

q w q w

Connecting the speaker cables

Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the DRA-CX3, and be sure to interconnect the channels and polarities correctly.

1Peel off about 0.03 ft / 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it.

2Turn the speaker terminal counterclockwise to loosen it.
3Insert the speaker cable’s core wire to the hilt into the speaker terminal.
4Turn the speaker terminal clockwise to tighten it.
When using a banana plug

Tighten the speaker terminal firmly before inserting the banana plug.