Denon DVD-3910 (6) Connecting to a Stereo Component, (5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

ENGLISH

(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

✽Set the “AUDIO SETUP” default setting as shown below. (See pages 38 ~ 41.)

• “DIGITAL OUT” → “PCM” “LPCM (44.1kHz/48kHz)” → “ON”

Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.

DVD-3910

B

	Digital audio	Digital audio
	input connector	input connector
Optical fiber cable (commercially available)	(OPTICAL)	(COAXIAL)
(or)

75Ω/ohms pin-plug cable (commercially available)

NOTE:

• Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.

(6) Connecting to a Stereo Component

DVD-3910

Stereo component

NOTE:

•When connecting to a 2-channel audio stereo device using the 5.1ch AUDIO OUT, set “AUDIO CHANNEL” under “AUDIO SETUP” on the “SETUP” to “2CH (SRS OFF)” or “2CH (SRS ON)” (see page 38.). For multi-channel sources, the signals are down-mixed into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing is prohibited.)

15