Denon DVD-3910 manual 80

ENGLISH

Symptom		Check	Page
	•	Check the HDMI/DVI connection.(Check the status of the HDMI/DVI-related indicators.)	19, 20
	•	Check whether the connected monitor equipment or other equipment supports HDCP.	19, 20
		(The DVD-3910 will not output a video signal unless the other equipment supports HDCP.)
An image is not projected with an	•	Check the settings of “HDMI/DVI SELECT”.	53
HDMI/DVI connection.	•	Check whether the output format of the DVD-3910 (HDMI/DVI FORMAT) matches the	19, 20
		supported input format of other connected equipment.
	•	Check whether the video output setting at “PURE DIRECT” is set to “VIDEO OUT : OFF”	47, 48
		or “ALL OFF”.
	•	Check that the batteries are inserted in the proper “<” and “>” directions.	23
	•	The batteries are dead. Replace them with new batteries.	23
Remote control unit does not operate.	•	Point the remote control unit at the remote control sensor when operating it.	23
	•	Operate the remote control unit within a distance of 7 meters from the remote control	23
		sensor.
	•	Remove the obstacle between the remote control unit and remote control sensor.	23

80