ENGLISH
eWhen “DENON LINK” is selected:
OFF (Factory default)
Digital audio signals are not output from the DENON LINK terminal.
2nd
Set this when the amplifier to be connected by DENON LINK 2nd. 
If you connect the DENON LINK, set to 2nd.
When the DENON LINK 2nd connection, Super audio CD’s signals are not output from the DENON LINK connector. Please use the analog output terminals or the IEEE1394 connection.
When the DENON LINK connection, could be output 192- 176kHz/24bit 2ch sources or 96kHz/24bit 6ch sources.
When the DENON LINK is set, the down mixed audio signals are output only from the Left and Right and Front Left and Front Right terminals.
rWhen “IEEE1394” is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394 terminal.
ON
B When “ON” is selected:
This will lead to the “AUTO PLAY”, and “AUDIO FORMAT” setting screens. Select the item to be set using the (•, ª) cursor buttons and press the ENTER button.
No audio signals are output from the analog connectors when IEEE1394 is set.
B Auto Play
Set this when automatically playing this unit from another device,
3 under circumstances in which this unit is used in conjunction with a DENON device that supports IEEE1394.
BAudio Format
Set this format of audio signals from IEEE1394 connector.
BAuto Play Setting Method
OFF (Factory default)
Set this when you do not wish to control the operation of this unit from another device.
ON
Set this when you wish to control the operation of this unit from another device.
BAudio Format Setting Method
FORMAT 1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT 2
This is a mode for future system expansion.
IEEE1394 indicator in the display
When “IEEE1394” set to “ON”, this indicator lights as bellow.
flashing.............. | self check of IEEE1394 connections. |
light ................... | IEEE1394 connection is OK. |
slow flashing..... | IEEE1394 connection is NG. (Loop |
| connection) confirm the connection. |
fast flashing ...... | IEEE1394 connection is NG. confirm the |
| connection. |
✽To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button on the remote control unit.
D I G I TA L I NTERF ACE SETUP
HDMI/ DV I BLACK L EVEL
HDM I AUDIO | SETUP | |
DENON LINK |
| OFF |
IEEE1394 |
| 2nd |
E X I T SE TUP |
|
|
SE L ECT : | DEC I S I ON : ENTER BUT TON | |
D I G I TA L I NTERF ACE SETUP
HDMI/ DV I BLACK L EVEL
HDM I AUDIO | SETUP | |
DENON LINK |
|
|
IEEE1394 |
| OFF |
|
| ON |
E X I T SE TUP |
|
|
SE L ECT : | DEC I S I ON : ENTER BUT TON | |
I EEE 1 3 9 4 SETUP
| I EEE 1 3 9 4 | SETUP |
|
AUTO PL AY | OFF | ||
AUD I O F ORMAT | F ORMAT 1 | ||
SE L ECT : 
DEC I S I ON : ENTER BUT TON
I EEE 1 3 9 4 SETUP
| I EEE 1 3 9 4 | SETUP |
| |
|
|
|
| |
AUTO PL AY |
|
| OFF | |
AUD I O F ORMAT |
|
| ON | |
SE L ECT : 
DEC I S I ON : ENTER BUT TON
I EEE 1 3 9 4 SETUP
| I EEE 1 3 9 4 | SETUP |
| |
AUTO PL AY |
|
|
| |
AUD I O F ORMAT |
| FORMAT1 | ||
|
|
| FORMAT2 | |
SE L ECT : 
DEC I S I ON : ENTER BUT TON
35