TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH

0

2. Playing Back with a Direct Connection to a TV

When connected to the television’s component video input terminal

The DVD-A1UD’s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the
output to the corresponding resolution of the connected television by setting, on the GUI menu: “Video
Setup” – “Component Resolution” (vpage 26). Images will not be projected normally if the television
resolution and DVD-A1UD’s output resolution do not match. Copyright protected DVD is output in
480i/576i or 480p/576p.

When connected to the HDMI input terminal

Outputting both digital video and digital audio signals.
See “Required Settings for HDMI Connection” (vpage 15) for HDMI video output and audio output
settings.
n
•
n
3. Playing Back 2-Channel Audio

Connecting to a Device with Analog 2-channel Audio Input

Terminal with Balanced Cable

Select “Audio Setup” – “XLR” (vpage 30) from the GUI menu beforehand to match the device to be
connected.
"6%*0
"6%*0
*/
-
3
Stereo
NOTE
Do not short circuit between each terminals. When making connections, check the input terminal
layout of the device to be connected with the owner's manual.
The default DVD-A1UD balance model XLR input connectors pin alignment is as shown.
q GROUND w HOT e COLD
For software recorded in multi- channel, analog signals that have been down-mixed into 2 channels
are output.
•
•

Connecting to a Device with Analog 2-channel Audio Input

Terminal with Stereo Pin Plug Cable

On the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 channel” (vpage 27).
"6%*0
"6%*0
*/
-
3R
L
R
L
Stereo
For software recorded in multi- channel, analog signals that have been down-mixed into 2 channels
are output.

Connecting to a Digital Recording Device

"6%*0
$0"9*"-
*/
*/
015*$"-
MD Recorder
When converting multi-channel audio to 2-channel for output, on the GUI menu, select “Audio Setup”
– “Digital Out”, and set it to “PCM Down Sampling” (vpage 29). If you play back DVD or other media
with incorrect conguration, deafening noise occurs that may damage the speaker.
4. Recording a CD
Connections