ENGLISH



TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started SpecicationsPlayback

Switching a BD’s Primary Audio/Secondary Audio

With discs and les that have multiple audio track recording, you
can change the audio during playback.
With BD, you can set sub-track audio such as interactive audio and
commentary audio, etc., with “Secondary”.
Operations Enabled During Playback
You can program up to a maximum of 20 tracks.

Checking the Program Contents

Press setting playback.
The program setting screen will appear.
n

Playing Back in Your Preferred Order

(Program Playback)

SA-CD CD

Switching Audio

BD DVD-A DVD-V DVD CD SD DivX
1Press during stop.
The “PROG” indicator lights on the display, and the program
setting screen appears.
PROGRAM
Enter Clear
Track 1 - 16 Total Time 3 : 32
No.
1
2
3
4
5
6
7
8
9
10
Track
5
2
3
--
No.
11
12
13
14
15
16
17
18
19
20
Track
0-9 CLEAR+10
2Enter the track numbers you want

to program on the program setting

screen.

~ , ·············································Entry
··············································Decision entry
3Press .
Playback begins in the programmed order.
1During playback of an Primary Audio/Secondary

Audio title, press .

The audio number currently being played is displayed.
Audio
Primary 1/5 : Dolby Digital 3/2.1 English
Secondary –/1 : Off
2Press , select “Primary” or

“Secondary”, and then press .

Audio
Primary 1/5 : Dolby Digital 3/2.1 English
Secondary –/1 : Off
If multiple audio items are recorded, “the current
audio number/number of recorded audio items”
is displayed.
When “BD Audio Mode” is set to “HD Audio
Output” (vpage 33), “Secondary” audio is not
output.
b
b

Erasing Programmed Tracks One by One

Press during stop.

Erasing All Programmed Contents

Press .
n
n
You can also check the contents of the program, which appears on
the unit’s display. Press during stop.
Depending on the disc, audio switching may be restricted to
operation of the disc menu. In this case, switch the audio on the
disc menu.
Be sure to set “BD Audio Mode” to “Mix Audio Output” (vpage
33) for playing back secondary audio.
Depending on the BD, even if picture-in-picture playback is set to
“Off”, Secondary Audio only may be output.
•
•
•
3Select your desired audio language with .
Audio
Primary 2/5 : Dolby Digital 3/2.1 Japanese
Secondary –/1 : Off
4Press .
The setup screen disappears.