TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH



Connecting to the Network

5. Updating to the DVD-A1UD’s Latest Software Version
You can update by downloading the latest rmware from the Internet.
For more information, on the GUI menu, select “Other Setup” – “Firmware Update” (vpage 33).
See “Network Setup” (vpage 31) on the GUI menu for more information on network setting.
•
•
Internet
Modem
Router
Computer
LAN port/
Ethernet
connector
To WAN port
To LAN port
To LAN port
ETHERNET
connector

System Requirement

Internet Connection by Broadband Circuit

Modem

Device that connects to the broadband circuit and conducts communications on the Internet.
A type that is integrated with a router is also available.

Router

When using the DVD-A1UD, we recommend a router with the following features.
Built-in DHCP (Dynamic Host Conguration Protocol) server.
Function that automatically assigns an IP address on the LAN.
Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

Ethernet cable (CAT-5 or greater recommended)

An Ethernet cable is not included with the DVD-A1UD.
For Ethernet cable, we recommend you use shielded straight cable (normal type).
If you use the at type or a non-shielded cable, the noise may adversely affect other devices.
For Internet connection, use an ISP (Internet Service Provider). Ask your local dealer for details.
NOTE
• It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a
broadband connection, there is no need to subscribe anew.
• The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.
• DENON assumes no responsibility whatsoever for any communication errors or troubles resulting
from customer's network environment or connected devices.

Others

The DVD-A1UD can use the DHCP function to automatically set the network.
With the type of circuit in which network setting is performed manually, when subscribed to a provider,
conduct the setting in accordance with “Network Setup” on the GUI menu (vpage 31).
If you connect the DVD-A1UD to a network without a DHCP function, conduct IP address and other
settings according to “Network Setup” on the GUI menu (vpage 31).
The DVD-A1UD does not support PPPoE. If you subscribe to a circuit that is set with PPPoE, a PPPoE-
compatible router is required.
When setting manually, check the setting contents with the network administrator.
n
n
n
•
•
n
•
•
n
•
•
•
•
•
Connections