Pre-main Amplifier Block
Use these to control the
AMP
POWERMUTING
9
8
TRACK FUNCTION VOLUME
3 2 1
PAUSE STOP PLAY
CD
B
REMOTE CONTROL UNIT
CD player Block
Use these to control the CD player connected to the
1PLAY : Playback
2STOP : Stop
3PAUSE : Pause
8: Auto search
(to beginning of track)
9: Auto search
(to beginning of track)
NOTE:
With DENON portable CD players and some other CD players, the auto search mode is set when the 8 or
9button is pressed shortly then released, and the manual search mode is set when one of the buttons is held in.
MUTING :
When pressed, the main unit’s power LED flashes and the speaker output is turned off. When pressed again, the mute mode is canceled and the power LED stops flashing (remaining lit).
POWER :
•When the main unit’s power switch is set to the ON/STANDBY position (¢), press this to turn the
•When the power is turned off from the remote control unit, the main unit’s power LED remains lit, but the input LED turns off, indicating that the PMA- 2000IVR is in the standby mode.
•When the main unit’s power button is set to the OFF position (£) after turning the power off from the remote control unit and then set back to the ON/STANDBY position (¢), the
VOLUME •UP :
While this is pressed, the main unit’s volume control turns clockwise and the volume increases.
VOLUME ªDOWN :
While this is pressed, the main unit’s volume control turns counterclockwise and the volume decreases.
FUNCTION •:
Use this to select the program source to be played. The function switches in the following order each time this is pressed: CD / TUNER /
/PHONO / CD
FUNCTION ª:
Use this to select the program source to be played. The function switches in the following order each time this is pressed: CD / PHONO /
/TUNER / CD
•The
•Note that operation may not be possible for some models.
CAUTION:
Some of the functions of the
11