Rear Panel

@1 @0
!2 !3!4!5 !6
!2Inputs terminals (INPUTS)

These are input terminals for CD players, turntables, AM/FM tuners, tape decks or other playback components.

NOTE:

The PHONO input terminals are equipped with a short pin-plug. Remove this plug to connect a record player.

Store the removed short pin-plug in a safe place so as not to lose it.

!3Playing and recording input/output terminals (TAPE-1/CD-R, TAPE-2/MD)

These are playing and recording input/output terminals for connection to tape decks.

!4Power amp direct terminals(POWER AMP DIRECT)

Souurce connected to this terminal is directly fed to the power amp. set volume level by the component connected to this terminal.

!5Power amp direct switch (POWER AMP DIRECT)

ON position:

Power amp direct terminal is selected when INPUT SELECTOR is set to AUX-2/P. DIRECT position.

OFF position:

AUX-2 is selected when INPUT SELECTOR is set to AUX- 2/P. DIRECT position.

!9

!7!8!6Pre out terminals (PRE OUT)

Use these when adding a power amplifier, a subwoofer with built-in power amplifier, etc.

Connect these PRE OUT terminals to the input terminals on the additional power amplifier, subwoofer, etc.

NOTE:

Signals are outputted from the PRE OUT terminals even when using headphones.

No signal is outputted when selecting power amp direct terminal (see o, page 5)

!7Speaker systems terminals(SPEAKER SYSTEMS)

Connect the speaker systems here.

!8AC inlet receptacle (AC IN)

Connect the included power supply cord here.

Do not use any other cord than the provided power supply cord.

!9Attachment plug receptacles (AC OUTLETS)

AC outlets are used for connecting amplifier component units, such as tuner, turntable, tape deck, etc.

•SWITCHED (Total capacity: 120 W / 1 A):

These outlets are turned ON/OFF when main power switch is turned on/off.

•UNSWITCHED (Capacity: 240 W / 2 A):

This outlet is always ON whether power switch is on or off.

NOTE:

This equippment may be different according to the country.

6