Denon PMA-500AE Remote control unit, Rear panel, Speaker Systems, Disc Skip, 8AC Outlet

ENGLISH

Getting Started

NOTE:

Getting Started

Remote control unit

•When the VOLUME control knob is set just beyond the “12 o’clock” position (over halfway), the adjustments that can be made with the BASS and TREBLE controls is decreased.

•When the VOLUME control knob is set to maximum or turned fully clockwise, the base and treble can no longer be adjusted.

•Functions r, t, y and !1are only available when the SOURCE DIRECT switch is set to “£OFF”.

Amplifier operating

buttons

POWER button

This operates the main unit’s power.

		POWER
	CD
1	2	3

DENON product

operating buttons

CD player block

0~9, +10 : Number buttons

REPEAT : Repeat playback RANDOM : Random playback

Rear panel

Input source selector buttons

These switch the input source.

4	5	6
7	8	9

8, 9 : Search

1: Play

3	: Pause
2	: Stop

!4

!5 !6 !7

!4SIGNAL GND (ground) terminal

Connect the ground wire from your turntable here.

NOTE:

• This terminal is not a safety ground.

!5Input terminals (INPUTS)

Connect your source equipment here.

!6Recording input/output terminals (TAPE-1/CD-R and TAPE-2/MD)

Connect your recording equipment here.

!7Speaker system terminals

(SPEAKER SYSTEMS)

Connect your speakers here.

!8 !9

•Short-circuiting plugs are inserted into the PHONO input terminals. Remove these when connecting a turntable. Be sure to keep it for future use.

MUTING button

Press this to mute the sound. The power indicator on the main unit blinks red.

Press again to produce sound.

Volume adjust buttons

These adjust the volume.

0	+10	REPEAT
RANDOM
PHONO	TAPE-1 / CD-R TAPE-2 / MD
CD	TUNER	DVD / AUX
		MUTING
TUNER		DISC
PRESET		SKIP
A / B	REC
	DECK

RC-1022

CD player block

DISC SKIP

This button selects the disc, when using a DENON multi-disc CD player.

TUNER block

TUNER PRESET •, ª

These switch the preset channel.

Tape deck block

6: Rewind

7 : Fast-forward

0 : Reverse play

1 : Forward play

A/B : Switch between decks A and B for double decks

REC : Record 3 : Pause 2 : Stop

!8AC OUTLET

Use this as the power outlet for other audio devices. Check equipment power requirement ratings before use (see the ratings as marked on the rear panel). If in doubt consult with your dealer or DENON distributor.

!9Power supply cord

3

•The included remote control unit can be used to operate DENON CD players, tape decks and tuners.

•When using it, also refer to the operating instructions of the other devices.

•Some products may not be operable.

ENGLISH