Denon PMA-500AE Operation, Preparations prior to playing, Starting playback, Starting recording

ENGLISH

<LOUDNESS> <SOURCE DIRECT>

Operation

<SPEAKERS> VOLUME

POWER	<TREBLE>			INPUT SELECTOR
<BASS> <BALANCE>
				POWER
				POWER
			CD
		1	2	3
		4	5	6
		7	8	9
		0		REPEAT
		RANDOM
		PHONO	TAPE-1 / CD-R TAPE-2 / MD
INPUT SELECTOR		CD	TUNER	DVD / AUX
	VOLUME			MUTING
		TUNER		DISC
		PRESET		SKIP

A / B REC

DECK

RC-1022

About the button names in this explanation

<> : Buttons on the main unit

[ ] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Preparations prior to playing

1 Set the volume to the minimum by using VOLUME.

2 Set <SOURCE DIRECT> and <LOUDNESS> to “OFF”.

3 Set <BASS>, <TREBLE> and <BALANCE> to the center position.

4 Press <SPEAKERS> A or B depending on the terminals to which speakers are connected.

5 Turn on the power by pressing POWER.

• The power indicator blinks red for several seconds, then lights green.

Starting playback

1 Use INPUT SELECTOR to select the source to be played.

•Select one of the sources among the following: TAPE-2/MD, TAPE-1/CD-R, PHONO, CD, TUNER and DVD/AUX.

•The input indicator for the selected source lights.

2 Play the selected source.

3 Adjust the volume by using VOLUME.

4 Adjust the tone with <BASS>, <TREBLE>, <BALANCE> and <LOUDNESS>.

If there is no need to adjust the tone, press <SOURCE DIRECT>.

Starting recording

1 Turn <INPUT SELECTOR> to select the source to be recorded.

PHONO, CD, TUNER, DVD/AUX:

Select the device connected to the recording terminals to record.

2 Set the recorder to the record mode.

3 Start playing the source to be recorded.

Copying cassette tapes

1 Turn <INPUT SELECTOR> and select “TAPE-1/CD- R” (or “TAPE-2/MD”).

TAPE-1/CD-R, TAPE-2/MD:

Select this to record from tape deck 1 onto tape deck 2 (or from tape deck 2 onto tape deck 1).

2 Set the device connected to the TAPE-1/CD-R (or TAPE-2/MD) terminal to the record mode.

3 Start playback on the device connected to the TAPE- 2/MD (or TAPE-1/CD-R) terminal.

•When performing these operations, also refer to the operating instructions of the other devices.

6

ENGLISH